mick-ne Posted March 22, 2019 Posted March 22, 2019 I have used a Bandit Arm in my ET Today I noticed there is around 2mm float side to side when its bolted up I presumed the Tophats I had made were 2mm too long. Took the Arm out and fitted the normal Bandit Tophats and theyre the same is this normal ? Cheers Mick Quote
Blubber Posted March 22, 2019 Posted March 22, 2019 Sounds like the spacer in the swingarm might be to long causing this problem. A bit of play is normal but 2mm is excessive... If you torqued up the swingarm axle correct Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.