Jump to content

Search the Community

Showing results for tags '7/12'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Technical Forums
    • OSS Racers
    • Air Cooled
    • Oil Cooled
    • Water Cooled, V-Twins, Singles and 2-strokes
    • Forced Induction
    • Trick Frames
  • General
    • Events

Calendars

There are no results to display.


Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


Location

Found 2 results

  1. Hey guys. I have a B12 loom and engine in my 88 750 and I’m getting ready to do the DOT head swap. question is can I use the 750 CDI with the bandit loom?? I know a few pins are in different positions but I’m wondering what to do about the neutral switch wires as the 750 CDI doesn’t have pins for that. i have the 750 loom but I’m sure it’s trashed as the bike was In horrible condition when I got it (hence why I used the B12 loom) here’s how she’s looking now and thanks in advance for any advice Cheers O
  2. Hello all. New member here. I am building a Slabside 7/12 and have used a bandit donor including its loom. My problem is what to do about the speedo and rev counter as the bandit ones don’t suit the slabby race replica style that I am going for. Ideally, I don’t want to do too much electrickery so a plug and play solution would be best if possible. Surprisingly, given that the bandit is such a magnet for modifiers, I can’t find much out there as a direct replacement. I am not against a digital dash but I would want a decent size screen. Not one of the little ones that you see on MX bikes (Vapor etc.) I have considered, as a last resort, butchering the bandit clocks and mounting them on a plate with a foam surround to try and get something close to the look I want but I think this would be a bit half-arsed. Any suggestions greatly appreciated.
×
×
  • Create New...