Pheasantplucker
-
Posts
169 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Pheasantplucker
-
-
12 hours ago, vizman said:
Indeed it does but the owner likes to make it awkward for me.
I have an account with the importer if you want one?
-
On 10/28/2020 at 5:21 PM, vizman said:
Black box with the four terminals (under the orange perspex) comes with two fobs, buy them off Eblag for around 20 squids, 12v 40amp Chinese jobby...
..no lazy Eblag link, just use your noggin and type what you want into Eblag search bar.
Th axel joust b box you’ve used has a plug in remote facility I think?
-
A ‘ work in progress ‘ getting closer, jeep led headlamp fits a treat.
-
4
-
-
Thanks for your confirmation, bought one and fitted it tonight.
Very pleased with fit and extra illumination.
-
2
-
-
Thanks, it looked like it might fit and I presumed if it did someone here would have done it!
-
Hi, has anyone tried to fit one of the new hid/ led headlights in a Et cowl?
I see on Eblag there are some rectangular jeep headlights on offer!
-
Worth taking the time and trouble to get it right.
I collected a failed streetfighter project this morning with a nice JMC arm in it but the fella who built it had the chain run so bad it has eaten a chunk out of the arm, didn't spot it till i'd handed over a wedge of cash!
-
Yes, my feelings too, looks perfect. I’ve admired that bike for years, a masterful build.
-
On 4/22/2017 at 1:24 PM, gsx said:
One of my all time favourites
Mine too, just looks so right, all of it!
-
Very nice, get a fairing on it and its absolutely bloody perfect! I want one.
-
Looks a tidy job, I think I'll try to do a similar job on mine.
-
On 2/7/2019 at 8:58 PM, Gixxerm8 said:
Nop FZR 1000 expu
Looks like it was designed to fit!
Did you move the top mount?
-
Hi, Is that a harris swing arm?
-
10 hours ago, YoshiJohnny said:
No I don't think so, when JMC got broken into and a load of material along with 10 boxed and ready to ship swingarms the guy who owned the company was gutted.... then the insurance refused to pay out.. he was a broken man.
The stock was just the alloy extrusion lengths and apparently it was fucking expensive...
The thieves got away with a good bit of it too.
I bet the bastards weighed it in! what a waste.
-
I'm interested to find out too, I'm building a frame similar to a mag 2 and would like a reasonable priced/easy to fit swingarm for my project.
-
HPF1
in Trick Frames
How's progress?
-
On 12/17/2018 at 8:44 AM, clivegto said:
Yes love a challenge, was surprised how different the 2 magnum 2 frames are. The green one was for a early Z motor the red one had a GSX 1100et motor .
Ive measured a harris frame that was built for a gpz1100 , the tubes either side of the motor have different bends and the tubes up to support the seat aren't parallel , it doesn't matter where they are but they are not a mirror image of each other.
Things of beauty none the less.
-
Enjoying following your build, any idea what motor the frame was built for?
What about the motor for the red frame, there seem to be so many differences when you look at them closely.
I'm trying to build my own frame, very similar to a magnum 2 so ive been looking at a few.
Like the turbo, you do like a challenge!
-
Nice work, youll have great fun riding this one.
I have one similar, with a KTM 690 in it, goes like stink, so light , so much fun. fuel boiling issues at the moment though!
-
Any thoughts on headstock material?
-
VERY slow progress, selling all the pipe benders I have collected as I have bought a Pro tools hydraulic bender with heaps of dies so should do everything I need.
Picked up a heap of 80x80x5mm box to construct a jig, it has to be adjustable as I have a harris and a rickman as 'Patterns' I wont copy either.
A friend wants a frame to put a 750n kwak in too.
Moving forward ...................................................slowly!
-
1
-
-
No progress unfortunately, empty bandit motor on the bench an 8x4 sheet of mdf with wheels and rake trail drawn on but that's all.
I have a few projects on the go at the moment and need to get these done to clear space, I'm also looking for a good pipe bender as the two I have aren't as good as I would like.
I have a plumbers three legged bender and an old crossbow type bender they are both hard work to produce repeatable bends.
-
took the bike to moorespeed racing, they did a few dyno runs and found it ran a bit weak, they made a few adjustments/jet changes and running better now BUT I have noticed a head gasket oil leak.........now stripped for gasket replacement, if it isn't one thing its..................................
-
My next project is a green one!
A Z650 though.
Some twat decided he liked the german streetfighter look!
It'll be a café racer next, not enough left to go standard.
K8 Swingarm 1100K Frame
in Oil Cooled
Posted
I’d like to know how this one turned out, I’m trying to fit a k7 arm in a 1991 gsxr11 myself..