Andyb

cheers @wraith. I'll take a looksee

Hi. I have managed to get a set of 4-2 exhausts for my 1980 GS550 model. It has the link pipe. The silencers are a bit naff. Looking for ideas. Is it possible to change the silencers and keep the downpipes etc?

Cheers @Gixer1460. Now I know I can do the timing and cam line up ,. The removal and swap around seems a good idea. Andy

Hi. Setting the clearance on the valves is proving to be a pain. Haynes says do it either upright or horizontal (left or right) depending on inlet / exhaust. Okay so I get a reading of 0.09mm, which is too much, 0.03 - 0.08mm is the range. I'm sure I have read go towards the larger gap, but could be wrong. Anyway, how do I get the shim out without removing the cams again? All the gaps vary between 0.03 and 1.04mm I know the size of shims within the engine, and think I can move a couple around to decrease the high reading and increase the low. Where can I get shims at a reasonable price? TIA Andy

Cheers @Gixer1460. Moved across a tooth and alls good at the moment. Just the joy of putting the carbs back with the air box. Ta

Hi. I am trying to set the timing /camshaft timing marks. I have set the timing mark to the 'T' mark, however I can't get the exhaust mark @ 2 to be vertical. It's leaning slightly left. Is getting the 20 links pins between exhaust 2 and inlet 3 mark more important than the arrow being vertical? Sorry it's a bit of a weird question, but I assume having this out of sync will end up with bent valves and hard to set TIA Andy

Not that I have the skills, but I would think tig filling the hole and starting again! Just my pennies worth.

Thanks for the input guys. Motobatt ordered

Thanks @coombehouse

Thanks @markfoggy. I thought this would be a simple yes or no,. I hadn't realised there was so many variations of thread inserts

Thanks @Jaydee.

Doh,,. It's a GS550. Cheers anyway @Jaydee. Best place to get them?

Hi,. Gone and stripped one of the breather cover threads. Can I get away with an unbranded helicoil kit, or should I go with a Bergen, or Helicoil kit thanks

Hi guys looking for a replacement battery for my 750es. Looking at Motobatt, but confused over which model. The bike us on an 89 plate, not sure if this makes it an esf or esf model. Anyone help? Thanks

I have a set of Dyna 3ohm coils and Taylor leads, that came with a project bike I haven't started, will they work on the GS550? Don't want to fuck 'em up !