carlinmidarlin
-
Posts
234 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by carlinmidarlin
-
-
Top advice , job done now , I must admit I thought it would break
cheers mick
-
2
-
-
Cheers fellas I'll have a go this weekend
-
Any info on how to remove the oil sight glass on the engine casing so I can have it powder coaded
cheers mick
-
How much are they jonny1 pump ?? , have you a item number and how hard to fit to a bandit engine mate
cheers Micky
-
Damm phone , quick shifter
-
Hi , has anyone done or got a link to fitting a Weill shifter to a slingshot
cheers mick
-
Yeh it idles fine mate but the Rev counter only starts at 3000 so it doesn't show much on choke
-
Looking at the bike it's all 1200 bandit stuff I'd carbs , Cdi etc , as for running its good apart from the pulling up to a stop , it's just like you have hit the kill switch but hit the starter and it starts again
-
Hi all , I bought this a couple of months ago but only been out proper today , it's a 750 j but has a 1200 bandit donkey init , when it starts up its always abit fluffy , I went out today and it's a blast until you pull up at a junction or lights then it cuts out 99% of the time , pissin me off now as when you ride it there's no flat spots or anything and pulls really good , any info please before I go stripping carbs
cheers mick
-
1
-
-
I've got a slingshot gsxr with a 1200 bandit motor fitted with loom etc , has anyone any info if later , later better looking gsxr switch gear fit or how hard it is to fit
-
Here's my J , sadly bought like this not built by me , goes very well
-
2
-
-
Here's the gsxr 1000 k9 plug on the back of the dash
-
-
Here's a couple of pics , I've just picked up a manual so I think the tacko may be right whe I start the cut n shut , is there any way of cuttin into the loom so I can use the gear indicator
-
I'll get some sorted this afternoon
Cheers
-
Hi , I've got a hm dash for my project , it came of a gsxr 1000 k9 , I have the hm back plate fitted withe the k9 loom ( these are plug n play ) I've also got the wiring diagram but I can't get me head around how to wire it into my bandit loom , im looking for help to get the rpm and gear indicator to work , the speedo works off gps so that ok
cheers mick
-
Keys
in Oil Cooled
I've just had 2 new ones done for £13 at my local lock centre
-
Me to mate
-
1
-
-
Cheers jaydee I'll look at the 1 I've made
cheers mick
-
1
-
-
Can anyone give us any info on the length of the clutch push rod for a 1200 bandit , I've made 1 up from what I guy told me but it's not opening the clutch fully , have I made it to short or to long
cheers mick
Gsxr to bandit pick ups
in Oil Cooled
Posted
Any info to this please I've got a bandit 1200 engine that's got gsxr pick ups fitted but the gsxr looms shite so could I just plug a bandit 12 loom into it
cheers mick