[Gsxr fuel tap flow/flatslides]

7 hours ago, Kamikaze said:

I have no dramas with my original fuel tap on my FCR39 track bike, its a 91 model tank and tap.

i switch it to prime and run both fuel lines to the carbs and the vacuum hose to the number 4 intake rubber.

 

I have no problems at all on track with fuel starvation. but will depend on the fuel tap, they did change on some models

Here’s my fuel tap, so do I run 2 hoses from the tap to the 1  hose from the flatslides plus I don’t have a vacuum spout on inlet rubber 4 ??

cheers

[Gsxr fuel tap flow/flatslides]

I just seem to have the 1 fuel line

[Gsxr fuel tap flow/flatslides]

Any pics mate 

[Gsxr fuel tap flow/flatslides]

Did you just use it as it was or blank anything or mods

[Gsxr fuel tap flow/flatslides]

Cheers thanx

[Gsxr fuel tap flow/flatslides]

Hi, is the std gsxr slingshot fuel tap good enough to use with 36mm RS flatslides

cheers

[Donington Classic Festival 31st July- 1st August]

Is this event still going ahead, if so we’re can you get tickets from

cheers

[R1 swingarm brace]

I think with the WR arm you need the calliper hanger and other bits to make good, I’ve got the brace and my mates a wiz alloy welding

[R1 swingarm brace]

7 hours ago, george 1100 said:

Mine

That’s the look I want, I’ve got the brace but was looking to see pics of it fitted, my minds made up now, going for it  cheers

[R1 swingarm brace]

Why did you only use part of the brace mate

[R1 swingarm brace]

Have you any pics mate

[R1 swingarm brace]

Evening all

has anyone any info on welding a gen 1 R1 swingarm brace to a slingshot swingarm, I’ve tried the search and the web, but not much out there

cheers

[thoughts on slabside swingarm]

2 hours ago, Blue said:

Yes & adjuster blocks 

I was thinking of doing my 750 J arm that way, have you got more pics please

[thoughts on slabside swingarm]

4 hours ago, Blue said:

Can always modify the original arm 

Is that a R1 brace welded to a std swingarm

[Hi flow fuel tap]

Ok thanx I’ll look in to this

[Hi flow fuel tap]

Hi all, I’m looking for a hi flow fuel tap for my slingshot, I don’t really want a pingal tap, what other bikes have the 44mm spaced hi flow Tap
cheers

[Slabby rear light on an aftermarket seat unit]

Heres my rear light sika flexed in and I had to grind away this little bit to get the bulb holder in as the holes for the seat unit are out we’re the battery is

[Slabby rear light on an aftermarket seat unit]

Yeh I can do it later dezza

[Slabby rear light on an aftermarket seat unit]

Just now, carlinmidarlin said:

This is mine in a fibre man seat unit, the light is sika flexed is so it come out with the seat unit as 1

[Slabby rear light on an aftermarket seat unit]

[Gsxr 1100k]

Pastyman you have a PM mate

[Awesome Oilcooled Pics]

 

 

 

[Gsxr 750 j carbs]

Sorry I should have said before, the engine has dot head cams and the head has been modded for the 11 carb rubbers before I bought it plus I got the 750 motor and carbs aswell

[Gsxr 750 j carbs]

Hi all , I’ve got a 12 bandit motor in my 750 slingshot and a set of 750 j carbs and a set of 11 m carbs,  what’s the best to use for the road

cheers Mick

[Engine Paint Recommendations?]

I used 2k paint on mine , the engine was fully de greased , 2k primer and then the top coat with good results