carlinmidarlin
-
Posts
234 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by carlinmidarlin
-
-
Sorry it's a std system with a slip on end can
-
Well that weren't to bad as me airbox was split in half cheers captain for the heads up , now do I plastic weld up the airbox or use a stage 3 dynojet kit and Ryanair filters as the bike has a full micron system
-
Anyone else tryed this way as I'm gonna start it in 10 mins
-
Right , sorry it's been a long time since I've touched this bike again , I took the bike to a mate for a mot and to see if he could sonic the carbs to clean them , but he's rung me to say the air box has a big crack half way through , so do I drop the engine and fit a newish air box or dynojet with filters , please help as the suns out now
cheers mick
-
Hi , I'm up for going watching for the weekend but what's the deal with camping , we're can I book to camp with a weekend pass to stop on site
cheers mick
-
As far as I no it's all std 1200 bandit
-
Just took the plugs out the bike and all 4 brand new are like this after a 40 mile ride out , as before it runs abit fluffy at tick over but under load it's great apart from when you pull up to traffic lights and it cuts out , could it just be the mixture running rich
-
Ive used por15 on a few tanks now and had no bother so far
-
1
-
-
I'm deffo on this , a full weekend of bikes n booze , were do I sign on the dotted line
-
Sorted now thanks , not often I say this but God bless that bidding site
-
Nice collection there fella
-
Need 1 like this asap if anyone's got 1
-
On 19 October 2016 at 0:12 PM, CossiEst said:
interesting, i've always used 18mm socket. U need the socket to be with thin walls, to fit into the head
-
Love it mate
-
Easy goes with the sealer then
-
Cheers I'll have a look now mate
-
What's the best gasket sealer to use on engine casings
-
Cheers all sorted now
-
God I love slabies but there out of my price range now so the 7/12 is a keeper for now
-
I've done mine in 2k and it's been great , as said etch primer is a must plus good prep
-
1
-
-
I'm going to Stafford this weekend like I've done for the last 8 yrs or so , I'll pick the plugs and spanner up there I hope
cheers mick
-
What the best plugs to run on my 7/12 bandit engined bike there so many on that site , are JR9B the right ones and what size plug spanner ?? I've not got 1 but some say 16 MM. and some 18 MM
cheers mick
-
He's some pics of the pic ups and plug
-
I've got a 12 bandit cdi , so it's just the pick ups i need , we're the best place to look
750 rear disc
in Oil Cooled
Posted
Hi all , could I use a 1200 bandit rear disc on my gsxr 750 rear wheel , both are 5 bolt and 5.5" wide
cheers mick