carlinmidarlin
-
Posts
234 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by carlinmidarlin
-
-
Looking to sell
-
How much are these going for these days
-
19 hours ago, TonyGee said:
how are they held on ?
Sika flex or tiger seal mate
-
1
-
-
Been busy making these for my slingshot, just got to flat n polish and then I can fit over my engine covers
-
8
-
-
Cheers T
-
Hi, are mk1 12 bandit coils the same as 600 bandit
cheers
-
Been looking abit more into this, if the rocker breather is taken off and carbs, dose this help
cheers
-
Just my luck as mines a 750 J
its a engine out job then
-
Hi, is it possible to remove the rocker cover from a 12 bandit motor in a 750 slingshot frame
just asking before I start the do the valve clearances
cheers
-
Cheers fella
-
1
-
-
Yes Devilman, that’s the baby
cheers
-
Hiya
anyone got the sizes of the front wheel dust seal for the 750/1100 M/N please
I just need the spacer measurement as I not got it with me
cheers
-
1 hour ago, Jdeac said:
So I have a slingy frame with a water boiler swinger ( top braced) anyone done some form of rear hugger??
How was the fitting as I’ve got 1 for mine that need doing
-
Hiya, I’ve managed to get a set done, I’m just waiting on the fixings to come now,this is how mine look on the bike
-
2
-
-
To
many pics
-
-
I started 1 tonight to see how it held up, and things look good so far, even out th mould there’s lots of work to be done
-
Hi guys
just an update to all that have asked about my bits I made, yes I did make a mould, but I’ve only got 1 so if it fucks up I can’t do loads plus I’m mad busy at work and other shit on at the min, I could do some for you lads but it’s not a quick job
-
2
-
-
I made these for mine
Carbon n resin
-
2
-
-
Thanks all, I’ve got it out now
-
Cheers
you don’t no the part number do you
-
Hi all
whats the best way to get the breather out of the tank
ive had a go but it seems solid
cheers
-
5 minutes ago, Gixer1460 said:
Its not wrong but it would be 'better' if the tap has two outlets to use them to feed the two inlets.
What about the rubber not having a vacuum take off, the std 12 bandit carbs that were on the bike had 1 outlet blanked off from the tap and I’m sure the vacuum pipe came off the top off the carbs, the bike has always run on 3 and a bit cylinders until warmed up
cheers
-
29 minutes ago, Gixer1460 said:
That's odd as all the RS flatslides i've ever seen have two inlets one between 1 & 2 and another between 3 & 4! Can be clearly seen in the manual / parts breakdown.
Also odd not to have a vacuum port on at least one of the rubbers!
Is this bit wrong and I should do the 2 hoses from the tap to what you have said
Carbon covers
in Oil Cooled
Posted
Just done a dry fit on my brothers 12 bandit