wobblegob
-
Posts
312 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by wobblegob
-
-
All done and MOT'd. Now to sell it lol
-
1
-
-
just need to put bulb in back indicator and ready for mot
-
1
-
-
Paintwork tickled up. Not far off back together. Hopefully weekend, then get it up for an mot.
-
2
-
-
-
1
-
-
Woohoo running two wires had pushed out of the connector that goes from pickups to cdi box, must of been making some contact to allow a spark but not enough to make it run. Anyway all good now just got to balance carbs, when I find one of my adapters grrrr
-
2
-
-
its vht wrinkle paint
-
was all running before we pulled it to bits so it's something what we have done or disturbed. Stripped the carbs and give them a clean. Valve clearances have been done. So it looks like just gonna have to go through and double check stuff.
-
1
-
-
Swapped plugs didn't make any odds the plugs are sparking nice big fat white sparks
-
A little damp ish but not pissed wet through
-
Yep
-
Right guy's getting royally pissed off with this at min. back together enough to run ( in the losest turns .......run ) its running on 1/4 cyls but not on 2/3 cyls. Good spark, compression all good, fuel getting to carbs (block a carb inlet with my hand ......hand full of fuel) but will not run on 2/3 any ideas pissing me off at minute
-
Some pics from today's exploits
-
6
-
-
But more done today. Doesn't look like much but getting there ..........slowly lol
-
1
-
-
Bit more done this Sunday in shedlife lol. Swingarm in, out, in, out, shake it all about (forgot rear brake pivot needs to go in before swingarm )
-
3
-
-
-
1
-
-
Bit more done
-
5
-
-
Right chaps does anybody know if the cam cover bolts are the same as gsxr bolts ...........just thinking
-
Bits back from the powder coaters
-
6
-
-
Anybody know of any other shock that will fit this bike stock linkages etc don't mind if it jacks it up a little cheers chaps
-
Right in bits ready for powder coating. But have found that the pick up Engine cover is badly cracked has anybody got a spare for sale
-
Cheers for that jaffa will look into it
-
Fitted the new gear indicator switch, headstock nut etc. Even had it down the road
Next job will be pull it to bits ready for powder coating etc ..........when I have the money
-
Got a little more done on it today but having a dilemma with speedo cable the gsx750f one is too short and the es one is different fitting at the wheel. Any ideas chaps ?
-
There you go captain
-
5
-
7/11
in Oil Cooled
Posted
ahem so a i may of just bought a 7/11 dunno what to do with it yet. Do i keep as is with a few mods or get some original 750 bodywork and do a sleeper ? its not got the stretched swingarm on now but pretty much as in the pic