wobblegob
-
Posts
312 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by wobblegob
-
-
will have more pics over the weekend once i have picked it up
-
3
-
-
right guys, what exact frame and swingarm setup is this ? does anybody know the bike ? cheers in advance chaps
-
No different clutch mech altogether as far as i know, but somebody more knowledgeable will no doubt be along
-
ok, i stand corrected. i always had an issue on suzuki's but not on kawasaki's lol
-
ebc clutch plates are known to drag
-
7/11
in Oil Cooled
On 3/20/2019 at 11:20 AM, Katana said:Keep the horrid paint and horrid headlight fairing it suits you
fuck off .......its not pink anyway
-
1
-
-
7/11
in Oil Cooled
18 hours ago, LightsOut said:that V&H looks sweet! Is it new? I thought the pro pipe for the oilers were discontinued? ...or just a really nice Eblag score?
Off a mates father in law never used
-
7/11
in Oil Cooled
2 hours ago, Nickel said:Try to rebuild this upper cool swingarm, Looks like JMC.
?
-
7/11
in Oil Cooled
more bits for the build
-
2
-
-
I'm sure somebody said that the aftermarket rearsets of zx9r aklso fit slingshotsv (but cant find it now). Any body know if this is right and what years etc, also what else has same spacing etc cheers chaps.
-
5 hours ago, Sam-Jaffa said:
I must ask if there is any material refering to these breakages? I've never heard of a Chinese lever failing, I've ran them on alotbof bikes, I've even had my bike fall on another bike clutch lever first and the lever never failed
I had cheap Chinese anodized levers on my old gpz9 years ago. My mate used it out on a run with me. He snapped the brake lever in his hand and ran up a grass verge, luckily he wasnt giving it much. Admittedley it was a few years ago but it has made me wary.
-
woohoo new emulsion tubes arrived today.........get them put in over christmas sometime
-
2
-
-
new dynojet emulsion tubes ordered cheers guys
-
2 hours ago, Rotty said:
36mm gsxr 1100k me thinks .dynojet needle and dynojet emulsion tune DET002 ,get ya self some decent digital verniers you might gain .05mm lol
prone to ovaling out too
so not stock emulsion tubes then ?
-
35.5 mm
-
1
-
-
better pic of carb measurement didnt realise it had shifted so much
-
right chaps need to identify these carbs and what the bits inside are eg; stock or dynojet carbs are fitted to what i am led to believe is an 1100m motor (not had cam cover off yet to check)
-
2nd for halfrauds engine paint
-
11 hours ago, Duckndive said:
Most slingshot are interchangeable
yeah i know that im after a nice modern set lol
-
what footpeg hangers off other bikes (modern) fit an 1100k cheers wobblegob
-
7/11
in Oil Cooled
Right chaps does anybody have any idea what other make rear-sets fit the slingshot frames ? Cheers in advance guys
-
7/11
in Oil Cooled
Looked into this bike a little more and according to the frame number its an 1100k frame, with 750 front end , so would like to get hold of some rear panels in good condition. but will have to put below the top yoke clip ons on. Am I right in thinking I would need 750 top fairing and brackets to clear ? cheers chaps
-
7/11
in Oil Cooled
was thinking of maybe slingshot top fairing in green and clipons
-
7/11
in Oil Cooled
well its arrived today
martek ?
in Trick Frames
Posted
just spoke to martek yes it is one of their frames woohoo. more pics to come when it gets home lol