akronos
-
Posts
49 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by akronos
-
-
Can you link me a cometic head gasket for stamdard bore ?
-
Cometic are good brand?
-
Both are base gasket.
This is a head gasket 78€
-
I need new gasket for my GSX1100ef , i'm in italy and i can find easy Athena Gasket. Oem are very hard ...i only find some in Usa but delivery cost are very expensive!
you have any advice about it to give me?
-
Collettore GSF BANDIT 1200 https://www.subito.it/accessori-moto/collettore-gsf-bandit-1200-lecce-289184375.htm
Can i fit this header without lot of mods??!
-
Dezza sure,i have replace filter with new one Meiwa. No popping from exhaust ( original unmod exhaust)
-
1
-
-
Carburetor have 120 Main Jet and 47.5 Pilot Jet....
-
are this raiser good?
-
Great This link work perfect thanks.
Today I finished the bike:
New Spark Plugs BR8ES
New air filter
spark Plug Cables new
Clean and synchronized carburetors
But I find myself with a problem, after having tried for about 40 miles (the engine runs well and pulls hard) I removed the plugs again and as you can see... It seems very lean to me what you say?
-
Wow Great! Thanks! And the instrument how did you fix it?
the link you posted to me doesn't work. It sends me back to google drive but it doesn't load.
-
Do you have any photos of how I could build a plate to install the instrumentation? And what frontend can i swap without lots of mod? in italy there are few gsx / gsxr from which to take parts. -
Hello!
from what I understand if I find a shock absorber of a Ducati Monster 900 can I mount it without any problems or invasive changes?there are no other shocks that I can install without changes?
since you are kind and very informed I wanted to ask you another question:
How can I mount a naked handlebar? What alternative plates can I mount? Do you have some advice? -
the bike is almost finished. The front fairing and other small things are missing.
-
3
-
-
I need help. I have to disassemble the rear shock but I have no idea how it works: I saw there are two settings, someone has information about it? Maybe a scan or photo of the maintenance booklet. Thank you!
-
I wanted advice on how to mount the instrument closer to the steering plate and then install the naked type headlight. Thank you
-
I Have disassembly the carbs. Strange but are perfect! Even the camshaft seems fine
-
Spark plug from 1985
-
This is why my new motorcycle goes bad..ahahaha
-
i see only gsx1100 but pre 84'.....
-
I need a Workshop Manual. Anyone know where i can find it?
-
from what I saw in the motorcycle booklet the model was registered in Italy in April 1985. On some sites I read that it should have 124hp possible?
Thanks to SuzukiCycles.org !! Look the difference in HP from 1984 to 1985 .,... WHY?! The engine are the same.
-
Hello Im Mark from Italy. I bought 2 days ago a GSX1100ES. in my country are a strange bike bike...few exemplar sold in 1980s. Look at picture, GSX1100ES, in all datasheet this bike have 124 hp, my have only 111hp (from what i have read into documents) why? This is an error?
-
4
-
Head and Base Gasket Help!
in Air Cooled
Posted · Edited by akronos
I have de coke valve and seats and replace all valve stem seal. I have 1135cc engine . In europe gsx1100ef are the Usa Gs1150.