akronos

Are 120 links enough for 17-45 or 18-45?

How many links for 530 chain with 17/45 or 18/45 ?

Are good for my efe 530 conversion?

Why this did chain 530 with 130 link are so cheap?! Are a fake did chain?

I found this chain brand DID 530 with 130 links at a really low price. I was wondering... but what chain is it? https://www.Eblag.it/itm/535001301-CATENA-DI-TRASMISSIONE-DID-530-NERO-130-MAGLIE-CON-GIUNTO-A-CLIP-RJ/392504765993?hash=item5b631b6e29:g:VmcAAOSwdOxdtwtT

I have a GSX 1100 EF , i found a lot of 530 sprocket but 525....where i can find sprocket of that dimension?

What do you think about 530 chain with 17/45 or 18/45 ?

I need help on rear and front sprockets. If I install 525 or 530 conversion I need spacers?

Can I have some information? What type are better for conversion? 630 to 530 or 630 to 520?

I need info please. I need new exhaust manifold but marving costo a lot ... 500$. I need to know if i can do an easy adapt from another suzuki motorcycle

Goodmorning everyone. I removed the spark plug caps and noticed that the ceramic resistor lost the copper at the base and therefore resisted too much. I then replaced the ceramic resistor with a copper bar. Now I ask myself: which spark plug should I mount? Br8EA or B8EA? I tried a B8EA (dating back to the end of the year 80, with the brown writing) and causes a huge spark !!

Hello ! I need new regulator..... i see on amazon or Eblag a shindengen fake mosfet fh regulator, but i have fear to try it....only 18$..... can you give me some information about it?

My bike it's a 1985 GS1150 . The signal cable are black yellow from what i have read on manual

When I bought the bike had the problem that you see in the video even with the original instrumentation. I tried 3 (original) and they all had the same problem. I also bought another tacho (what you see in the video) but nothing. I tried to follow the black/yellow cable that carries the signal from the right coil to the instrumentation but it looks perfect. What could I check? https://www.youtube.com/watch?v=ppyvV-N3rrA&feature=youtu.be

Goodmorning everyone. I would like to replace the front end of my efe with something newer. I would like to know if there is any front end that can be mounted with the minimum of modifications.

Yyes sorry, Valve Clearance. i Set between 0.08-0.13

I noticed while I'm reassembling all an abnormal coloring inside the exhaust collectors , here's the photo. The valves and the game valves in the cylinder 4 were perfect , the carbation equal and adjusted for all four cylinders... The exhaust valve in 4# cylinder are whiter than other,spark plug too.

I tried with acetone and also with a specific product to remove paint, but it doesn't come off ...if I leave everything as it is, then I risk losing oil?

I'm about to reassemble the cylinders and the headboard, removing the old original Suzuki seals I noticed that they left like a paint (I think it's a sealant primer) on the surface between the planes(pictured you see silver). Should it all be removed completely? How can I do that?

I have the possibility to buy this bike for the amount of 700 € (about 800 $). I absolutely don't know the type of engine, but from what he told me the owner mounts the base of the Gsx-r ... Can you give me some information? Is it a good bike? I'll take it?

I found the problem, a thread of the rocker arm is ruined and the threaded bar with the nut no longer tightens. How do I proceed now? Do I have to buy the whole new piece or can I fix the thread?

this morning I adjusted the valve clearance, setting it as manual to 0.10: I state that I have a GS1150. I also removed the chain tensioner to clean it. Obviously all the procedures done with the crankshaft at the right T point. When I reassembled everything, this annoying ticking occurs, I don't understand if it depends on the chain tensioner or on the valves. Vids and sound of my engine: https://youtu.be/sGF1iL2z6gY

This cometic gasket are good how OEM?

Vesrah kit are bad? Kit already has gasket for the valve stem and washer for nut. Also there is the gasket for head cover. If i buy every single piece i spend three times

cmnsl gives me this link and refers to a complete kit (Vesrah). What do you think? https://www.cmsnl.com/suzuki-gsx1150ef-1985-f-e06_model13762/gasket-kit-non-oe_vg7027m/#.XLXG2DAzaUk