akronos

I have de coke valve and seats and replace all valve stem seal. I have 1135cc engine . In europe gsx1100ef are the Usa Gs1150.

Can you link me a cometic head gasket for stamdard bore ?

Cometic are good brand?

Both are base gasket. This is a head gasket 78€ https://www.cmsnl.com/suzuki-gs1150-1985-f-usa-e03_model34174/gasket-cylinder-head_1114100a03/#.XLTHgLfOMwA

I need new gasket for my GSX1100ef , i'm in italy and i can find easy Athena Gasket. Oem are very hard ...i only find some in Usa but delivery cost are very expensive! you have any advice about it to give me?

Collettore GSF BANDIT 1200 https://www.subito.it/accessori-moto/collettore-gsf-bandit-1200-lecce-289184375.htm Can i fit this header without lot of mods??!

Dezza sure,i have replace filter with new one Meiwa. No popping from exhaust ( original unmod exhaust)

Carburetor have 120 Main Jet and 47.5 Pilot Jet....

are this raiser good?

Great This link work perfect thanks. Today I finished the bike: New Spark Plugs BR8ES New air filter spark Plug Cables new Clean and synchronized carburetors But I find myself with a problem, after having tried for about 40 miles (the engine runs well and pulls hard) I removed the plugs again and as you can see... It seems very lean to me what you say?

Wow Great! Thanks! And the instrument how did you fix it? the link you posted to me doesn't work. It sends me back to google drive but it doesn't load.

Do you have any photos of how I could build a plate to install the instrumentation? And what frontend can i swap without lots of mod? in italy there are few gsx / gsxr from which to take parts.

Hello! from what I understand if I find a shock absorber of a Ducati Monster 900 can I mount it without any problems or invasive changes?there are no other shocks that I can install without changes? since you are kind and very informed I wanted to ask you another question: How can I mount a naked handlebar? What alternative plates can I mount? Do you have some advice?

the bike is almost finished. The front fairing and other small things are missing.

I need help. I have to disassemble the rear shock but I have no idea how it works: I saw there are two settings, someone has information about it? Maybe a scan or photo of the maintenance booklet. Thank you!

I wanted advice on how to mount the instrument closer to the steering plate and then install the naked type headlight. Thank you

I Have disassembly the carbs. Strange but are perfect! Even the camshaft seems fine

Spark plug from 1985

This is why my new motorcycle goes bad..ahahaha

i see only gsx1100 but pre 84'.....

I need a Workshop Manual. Anyone know where i can find it?

from what I saw in the motorcycle booklet the model was registered in Italy in April 1985. On some sites I read that it should have 124hp possible? Thanks to SuzukiCycles.org !! Look the difference in HP from 1984 to 1985 .,... WHY?! The engine are the same.

Hello Im Mark from Italy. I bought 2 days ago a GSX1100ES. in my country are a strange bike bike...few exemplar sold in 1980s. Look at picture, GSX1100ES, in all datasheet this bike have 124 hp, my have only 111hp (from what i have read into documents) why? This is an error?