Peterrr
-
Posts
123 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Peterrr
-
-
same wheel size if I remember from my old 850GL and 1000L... so it might fit, fork looks the same on the pictures..
-
Hey Guys
I stuffed a GSX750F engine in my popup katana, and because the GSXF has a cable clutch, and I want a fluid clutch I bolted one on from a GSXR1100
And I was wondering if anyone knows the length of the push rod I need, I don't think I have the right one at the moment because the cover won't fit..
-
I would keep the twin shocks
I have an usd fork in my kat 1100, and the rear swinger of a GSX Inazuma with twin shocks, looks modern and oldskool
-
1
-
-
Ah yes, CMSNL, there you can order the original Suzuki decals.
Allways better if you ask me, I once bought a decalset for my popup katana, and none of the decals were the correct size..
Come to think of it, I also need popup decals, also want it back in original colours pearly white and gold
-
1
-
-
9 minutes ago, captain chaos said:
yes the Kat looks cool in those colours. I have one as well.
Even a little popup kat! How cool is that
-
Did it too once, removed clutch, pulled out shaft, replace seal and put it all back together
-
-
I knew a great webshop tot decals but can't vind it at the moment...
I think it was a Canadian site..
-
48 minutes ago, Bert said:
Having the plan of painting yours too Peter?
Yes Bert, I have an aircooled kat 7/11 in the livingroom at the moment and I want the silver/red colour combination.
Might ask someone at work to paint it for me this summer.
What are your plans?
-
Would like to know that too ..
-
Watercooled 750?.. don't know.
In my opinion you can make everything fit, but I don't think a watercooled 750 is an easy fit -
Oil cooled 750F is not hard to find in Holland, and also has a dothead like the 750R
-
1
-
-
Hey Bert, welcome!
-
1
-
-
You can use K&N filterpods, number RC-0984
-
32mm Mikuni carburators
I had a stage 3 dyno on it with 4 individual K&N filterpods.
It runs pretty good with that
-
now this gives me an idea for my own livingroom
-
I would wonder why it is in bits, something wrong with it?
-
nice job,
-
4 hours ago, Jaydee said:
GSXR 1100 M/N BST40SS carbs.
Main jets > 125
Main air jet > 1.2mm
Jet needle > 6ZD13-3
Needle jet > P-2
Pilot jet > 40
Pilot screw setting > Preset (2 turns back)
Starter jet > 40
Float height > 14.7 +/-1mm
what jaydee said
-
Welcome
-
Oil cooled engine will fit for sure, working on the same modification myself.
-
1
-
-
that little piece of rubber is indeed to reduce the noise, but it is not something critical
I rebuild the clutch on my 1100ES engine a few months back, and also replaced that little piece of rubber.Don't know about that clutch plate tolerance, did your clutch rattle and slipped while driving?
-
very nice collection indeed! liking the skoal bandit
-
I think you need to modify the frame seriously to fit a 190 tyre and get the chain alignement correct.
-
1
-
Old XR41
in Trick Frames
Posted
great bike