[What's missing number plate light]

What's missing from slabby rear end 

Thanks 

[Accommodate new inlet rubbers]

Pic of my 1127 ported  cylinder head 

 

[Why do I see a slabby project and have to buy it]

Think now is the time to snap them up if going cheap could be a garage extension on the cards 

Just to finish smartening my turbo blandit fueling and wiring then can make a start on one of them 

[Cdi unit]

What cdi you after 

I've a 750 that was going to list up 

[k9 front end in slabbie]

Also interested in fork extension details 

Cheers

[oil cooler pipe replacement]

On 2/17/2019 at 4:44 PM, philwright said:

Changed the oil and filter on my 88j yesterday ,took it for a spin this afternoon and i have an oil leak, checked the sump plug and filter for tightness and both OK, then noticed that oil was weeping from the left hand ( looking from front of bike)  bottom oil cooler pipe union where it bolts onto engine, like a twat i must have damaged it when i took off the old filter ,i struggled to get it off so foolishly resorted to hammering a screwdriver through it to get it started ,must have gone straight through the other side and pierced the pipe.

Is it a straightforward like for like replacement when i get hold of a spare ?...just a matter of draining the oil and unbolting the pipe at engine end and top of oil cooler?...any tips welcome.

Is this the curved type cooler 

If so might beable to help 

[Why do I see a slabby project and have to buy it]

Was hoping the 750 was going to be a quick flip but its turned out going to need little more work than I wanted to do 

 

[Why do I see a slabby project and have to buy it]

So bought a 1100 off the for sale page 

Just picked a 750 up today 

Then got another 1100 to come end of month 

Just took my slingshot 1100 frame for powdercoating to build before others  

[Slabby undertray]

So acquiring parts together ready to start to build the bike and I've noticed that undertray is really poor and with the rest of the bike going to be well sorted as such and fibreman fairings how has everyone got round the old undertray since Jason doesnt make them for slabbys but does for slingshot 

Cheers 

Also picked up a 750 slabby that needs little work and this doesnt have one at all

[Been offered a slabby 1100 project]

Hes asking for 1500 but think it could be a little too much 

But I've not really seen many 1100 projects up for sale so hard to price 

I've a few projects on at minute but find it hard not buying slabbys 

Just bought a 750 that I don't need but had to buy it 

So now got 1 slingshot 1100k 1 slabby 1100 and a slabby 750 projects 

 

[Been offered a slabby 1100 project]

What would you recon would be a reasonable price to pay for a slabby 1100 been stood for a fair few years no front side panels or belly pan.rest all there

Motor turns over by hand but then stops so would need top end coming off anyhow 

[Slabby modern shock]

Not using for track just building a bike up 

The frame and swingarm I've got are 1100 so will this still lower it by 10mm ish 

Thanks 

[Slabby modern shock]

The setup I was considering is off a l2 gsxr 750 as the front will be lower due to running Aprillia front end 

I thibkbthis could work and also not using a potentially 15 year old shock 

What you reckon 

[Slabby modern shock]

Looked up and found that the 1100 had a eye to eye length of 315mm 

Seen a shock that is 310mm will this lower the seat height by much 

Also what others using shock wise 

Thanks

[slingy fuel tap options....]

Been using one on my turbo bandit 

Single outlet on off 

Works spot on 

And can obtain for cheap 

[Slabby with Aprillia wheels]

Be nice if it's the 6inch rear

Next time your there would you have a look for me 

Also can you remember what you did for chain alignment or did you just bolt it in for now to get it rolling  

[Parts bike for my projects]

Looking at them they in good condition so looks like I'll make use of these and clean up the scorpion system once built the bikes 

Cheers 

[Slabby with Aprillia wheels]

On 1/28/2019 at 11:03 PM, R1guy said:

What size rear wheel is this. Looks well

[Parts bike for my projects]

The headers on this bike are a devil system and someone welded a 3 bolt flange to end for the yoshi can 

Not sure if to sell or use them 

Anyone got feedback how the headers perform in comparison to say a scorpion system or akrapovic that I have in the garage also 

I need 2 systems for 2 bikes I'm building so wanting to keep the better of the 2 for performance wise 

Thanks 

[Slabby with Aprillia wheels]

This is the set up I'll be putting into the bike does have a 6 inch wheel that could be interesting to sort out 

[Slabby with Aprillia wheels]

Anyone got any pics with Aprillia wheels in 

Or in a slingshot just to get the general idea of the look 

Thanks 

[Scavenge pumps]

That’s the type of pump I’m running 

got it off a someone who got one but never built a turbo bike 

works well and better than a electric one as know it’s working all the time 

[K7 gsxr Swingarm set up in a slingshot 1100 k frame]

Thanks going to order a set and get the bushes for swingarm made then can go from there 

Thanks 

[K7 gsxr Swingarm set up in a slingshot 1100 k frame]

That looks a proper build 

Originally was going to build it up fairly standard with some L forks but as always can't help bud to build something a little bit more special 

Might get some measurements and trial for the parts to my frame 

Did you have to swap stem out for the front end like you have to on most conversions 

Thanks 

[K7 gsxr Swingarm set up in a slingshot 1100 k frame]

Doesn’t sound too bad to fit 

just contemplating what to do now I have front and rear ends complete 

would you say the forks are too short for the slingshot and need a step yoke or extenders making