Prime

Curious to know peoples views on what frames you could use instead of an 82 era 759/1100 katana seeing as they are scarse would have all the katana 1100 bodywork etc I’ve briefly looked at things like ez, inazuma, and et frames etc just pondering until I find what I want cheers

That’s fair enough I’m open to suggestions

HWB Posted 19 minutes ago Have you checked tour kickstand ? Might be loose Kickstand and clutch switches are by passed fella if that’s what your thinking

I’ve wondered if it’s pilots for a while it smells fuelly like it’s Just flooded if it does cut out and you can hear the revs drop

I did wonder if they were the wrong size However would I need to go up or down in size going on what I’m thinking I’d say up? thanks

B12 lump and carbs etc been set up on the dyno interested to know if anyone else has come across this, upon hard braking the bike cuts out not all the time (Now if I feel it, obviously a quick blip of the throttle etc keeps it on track)

Cheers sam that’s one I have looked at seems good no class - I have no idea hahaha Ill give them a gander cheers

Yes fella i will look into that thanks

Cheers I know for next time now haha

(Thanks to admin for moving my post appreciated) Hi guys and gals A mate had a bandit 12 motor run fine from what I can remember, he changed the cam chain guide as it was broken (was running fine before he took the head off and found this issues) after fixing this I don’t remember the engine being ran back up after that in my presence I have now acquired the motor and it has a bad noise from what sounds like the gear box (front sprocket side id personally say) Before parting the crank casing I took the clutch basket etc out and found the roller bearing had ovaled great I thought however this didn’t change anything I took the basket etc out once again and for a second ran up the engine The noise had gone completely upon doing this (clutch all seems fine upon visual inspection) Now I have the crank cases apart as I was thinking it was the bearings within the gearbox however they all seem fine I haven’t measured anything to see if there within spec according the the manual im just wondering if anyone had any experience with what ever I’m chasing Appreciate any input Thanks

Yes boss haha

I know how to and from what I can see from diagrams the wire colours are the same etc just wondered if someone had done it cheers

Cheers fella When I searched lipo lithium was like a remote car batt haha appreacite that

got a picture you can post of one of these fella ta

Anyone wired the slabby switchgear into a b12 loom I’m adament about having square switchgear from what I can see so far it’s doable just wondering if anyone done this as I don’t have the switchgear yet along with I need to waste posts to be able to view and post more on here ahaahaha cheers

Cheers guys much appreciated

Hi guys I've got early k series cops code 129700-4400 are there any shorter ones that I can use that give out around 3ohms as I'm not really liking how far they stick out the motor (b12) also what's the best way to test them so I know what ohms there putting out thanks