[Mk1 and mk2 bandit carb rubbers]

Hi all, are mk1 and mk2 1200 carb rubbers the same?

cheers jon

[Spacing front disks]

Thanks for that.

cheers jon

[750 w rear disk diamiter]

Hi all, could someone tell me the rear disk diamiter of the 750w with the top braced swingarm.

cheers jon

[Spacing front disks]

Thanks again for the responses folks I think I'm just going to buy the spacers I need as with work etc it will free me up to do other things rather than making the spacers.

while we are talking r1 forks what other calipers can I use I know the gold spots are good as they are an upgrade on the gsxr' is just wondered if there was any other options.

once again cheers folks.

[Spacing front disks]

Thanks will be nice when polished up etc. Just a shame I got to spend/do a bit more to make it work right.

cheers folks

[Spacing front disks]

Spot on thanks for that link. Looks like just the job and at a good price.

all help much appreciated.

cheers jon

[Spacing front disks]

Adding to this post if there are any other disks from different years that are of the same pcd that people know of. Then that maybe an option as earlier disks can be bought cheaper.

thanks again for comments

[Spacing front disks]

It's for an r1 front end with after market yokes. Which turned out to be wider than the stock yokes. And it going in an oil boiler with ws top braced swinger. Using r1 wheel also

[Spacing front disks]

Just had a quick measure deffo 215mm centres where as it should be 210mm. I'm using 06 r1 forks and wheels and the disks are 5mm so your idea is not going to work for me plus the cost of disks is alot. Do you think that having spacers water jet cut would be the same?? 

Cheers jon.

[Spacing front disks]

Probably about that amount. Seems the yokes I have purchased are about 5mm wider on the centres than oe. I have no issue centering the wheel was just unsure about the disks

thats the idea I had, but never thought of using old disks.

thanks for you advise

 

cheers jon

[Spacing front disks]

Hi all, what is the best way to space out front disks? Small washer or have a ring spacer made using the disk pcd? Also how much is it safe to space the disk out? 

 

Cheers jon

[Gsxr 1100/750 headers]

That is my thinking also as the 1100/1200 are taller. Just wanting to check with the people in the know on hear first. Before a purchase is made. Thanks for your post

[Gsxr 1100/750 headers]

Hi all quick question, are the 750 and 1100 gsxr twin exhaust headers the same? I want to go left and right cans on my 7/12 project. I've got the 1100 sump already. So just need to know if there is any difference between the 2. At a guess I'm thinking I will need the 1100 headers. Hope someone can help.

 

cheers jon

[Gsxr1100 sump onto mk2 b12 motor]

Thanks for the reply. si bag I have already got the sump. so no need for swaps. good idea though 

[Gsxr1100 sump onto mk2 b12 motor]

Hi all, will a gsxr1100 sump fit a mk2 b12 motor? Looking at going twin pipe on my project and I have seen it done but am unsure if it will work with the mk2 b12 motor. I know it's been done on the mk1 but want to check before buying the sump pick up and tubes. Hope someone can help. Will be posting a project thread soon.

 

cheers jon

[Mc sizes]

Hi all. What size clutch mc is needed for a mk2 1200 bandit? Also what size for radial front calipers. Cheers in advance

 

jon

[Fitting was-wt swingarm]

Hi, and thanks for the reply. I take it that there is no problem using the original 750 centre tube, all be it a bit fiddly fitting the swingarm pivot bolt.

cheers jon

[Fitting was-wt swingarm]

Hi all.

im wanting to fit this water boiler swing arm to my oil cooled project. What swing arm spindle do I need for it to fit the oil cooled frame as the original one is too big. And what other parts do I need. I have the dog bones and linkage to match the swingarm. Hope someone can help.

 

cheers jon

[750m top and bottom fork bearings]

I thought I was right. That's across all forks sad through to the k series yes/no

[750m top and bottom fork bearings]

Hi all, been doing a search to see if both the top and bottom headstock bearings on a 750m can be made to be 30mm id

from what I have read they can but just want to double/triple check.

 

cheers all

[Steering stems]

Cool thanks for that. What are the top bearing dimensions??

 

cheers all

[Steering stems]

Would I be right in thinking then that a slabby or slingy stem would press into the appropriate k series bottom yoke??

cheers

[Steering stems]

I will be able to start a project thread soon. Well when bloody work allows me to get on with it.

cheer again all

[Steering stems]

Cheers again dell. Are you a Suzuki bible lol

cheers jon

[7/12 filters]

Forgot to say the motor is in a slingshot frame if that makes any difference with fitment.

cheers