[Wheel rim to sprocket/brake disk]

That would be good @Madb

[Water boiler rear wheel]

@clivegto there is no comment???

[Water boiler rear wheel]

Sounds right to me.  So I'm still looking for the sprocket side measurement please.

[Water boiler rear wheel]

Thanks for that. Is it the same measurement on both sides.?

[Water boiler rear wheel]

Hi all. Anyone running a water boiler rear wheel  that could tell me the measurements from the wheel rim to the inside of the disk and also to the inside of the sprocket. At the centre of the wheel if you get what I mean. Asking hear as it's going in a oil boiler with a water boiler top braced arm.

This is for a Gsxr 750 1995 swinger. Hope someone can help. 

Cheers jon

 

•  
• Quote
•  
• Edit

 

[Wheel rim to sprocket/brake disk]

Hi all. Could someone tell me the measurements from the wheel rim to the inside of the disk and also the inside of the sprocket. Athe the centre of the wheel if you get what I mean. 

This is for a Gsxr 750 1995. Hope someone can help. 

Cheers jon

[750j/k to 750wp swingarm swap]

Good idea. 

[750j/k to 750wp swingarm swap]

@dupersuncin picture of the nuckle I posted from underneath. Does it look right at the shock fork? There seems to be a slight gap either side between the nuckle and fork.

[750j/k to 750wp swingarm swap]

@GammaboyI have an 08 fz6 wheel that may work it is an abs  hub though. Think it maybe wider than a normal r6 wheel. Need to find 1 to measure for comparison.

[750j/k to 750wp swingarm swap]

@Captain Chaosis there any particular cc bike that the calipers match the caliper mount I pictured above?? Would like to mount something more modern.

Cheers

[750j/k to 750wp swingarm swap]

This maybe right to 132331182405 then you need dog bones and the sleeves from your swingarm and some form of crush tube between the 2 as iirc the 1 from your arm will not slide into the water boiler arm. 

None of the mention parts are mine. And I am in no way saying they are the exact ones you may need.

Cheers jon.

[750j/k to 750wp swingarm swap]

This believed to be the same parts/ fitment 253040239418

[750j/k to 750wp swingarm swap]

Just a quickey search 322510583198 caliper and mount + mc etc

[750j/k to 750wp swingarm swap]

Arm was a 95 sorry.

[750j/k to 750wp swingarm swap]

Calipers mount is 75mm. At wheel spindle  is approx around 250mm + this is how I have it unless I've done something wrong.

[750j/k to 750wp swingarm swap]

My 750 braced arm has the notch on the inside of the arm for the caliper mount. I believe it's a 93 arm. Can post some pics if it helps.

[750j/k to 750wp swingarm swap]

Rf calipers work as they use the same mount. You also need the linkage and dog bones. I believe. Doing this swap myself. The arm is alot wider at the wheel end so unless you use the water boiler wheel (5.5 width) and the matching spacers you may need to make some for your wheel to work. 

I'm wanting to find a multi spoke wheel to try and match my r1 front end if any one knows of anything.

[K series hearders]

Thanks for that.

[K series hearders]

@davecara Do you know if I would be better of running a v  sump on my b12 750 or will the original b12 sump be fine. It's a mk2 if that makes any difference.

[K series hearders]

You are a top man. Much appreciated. Cheers

[K series hearders]

@davecaraWould you be able to measeure the diamiter of the tube/pipe engine side of the welds circled. Looking to make them into a twin can setup. Should be circled in the pic. 

Cheers jon

[K series hearders]

Top job thanks for doing that.

Cheers jon

[K series hearders]

Are they forsale on hear?? Im looking to see if the cans I have will work before I purchase.

[K series hearders]

Nice one. I take it that the link pipe or can will be a slip over style aswell.

Cheers

[K series hearders]

Hi all could some 1 tell me the outlet diamiter of the gsxr 1000 k1-4 headers that fit our oilcooled motors.

Cheers jon