inazumarob
-
Posts
93 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by inazumarob
-
-
You can fit GSX 600F wheel and discs with 4 or 6 pot calipers on STD legs. I would use a 17mm master. I have upgraded a 88 Slabby on STD brakes with a master cylinder off a Yam XJR and got much better brakes.
-
Thank you GSXRSAM, Ithink that I have one here if I can find it. Thanks Duckndive for info, I may use the 1100 ones if they fit better. Thanks everyone. Regards Rob.
-
Hi everyone, I want to fit a set of 43mm fork legs to my EFE to upgrade handling and braking. I have several set of yokes which I have already tried ( Mk 1 Bandit 1200 + RF 900) but none of them fit without alteration. Can I change the yoke pin to the EFE one on one of my yokes to make things easier. I have also got a GSX 600 Teapot I can pinch the pin out if it fits. Any info would be gratefully received. Regards Rob
-
Hi guys looking at the picture of the seals, they look worn to me. They should have more of an angle from front to rear of seal and a sharp edge where the seals hit the bore. The r/h/s seal looks deformed and stretched. I would change seals. Regards Rob.
- 2
-
Hi Guys, not really posted on here before. I have a GSX1100ET awaiting the start of its rebuild, collecting parts at moment when funds allow. I just wanted to say that £261 does not seem that expensive to me. No, I am not made of money either but I understand that The famous Ferret electrician charges around £ 1000 for a custom loom according to an article I saw last year. Please bear in mind that the loom is actually about 5 pieces, the main loom is about 80 % of it.
Regards Rob
Caliper Upgrade
in Air Cooled
Posted
I have used a GS500 wheel in std legs. Spindle spacers need remaking, and calipers need spacers on bolts to bring inline with GSX6000F discs. Use EFE Spindle.