Gsxrsam
-
Posts
390 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Gsxrsam
-
-
9 minutes ago, Rene EFE said:
I'm foreign, I can't help it.
Too many porn channels lol.
-
23 hours ago, YoshiJohnny said:
yeah it will work better with proper sized carbs and inlet rubbers...
I swapped cans as well as it failed the noise test and the make do baffle restricted it a lot.. it will be ace
And plugs......it is a gsxr, always swap plugs lol.....and not crappy NGKs either....
-
14 hours ago, Rene EFE said:
I'M FUCKING COMING!
Bit rude......:)
-
1
-
-
misfire fixed?
-
Bandit is longer than rest.....slingshot one is your best bet........then put whole bandit 12 front in it.......stem change only....
-
Thought that was always "how it was".......
-
Oh, go on then !
-
Expensive for decent sealed ones.....https://simplybearings.co.uk/shop/p43730/4TCR0643L/0643-NTN-Narrow-Section-Steering-Head-Set-Taper-Roller-Bearing-30x52x16mm-SEALED-MODEL/product_info.html
15mm for the top one.....
-
What are diameters of bearings needed?
-
1
-
-
Cheers all, got a top yoke to do using standard bottom yoke and forks......normally make top and bottom for usd conversion......
Original is in post.....might make a thin jig to check.....
-
Anyone got yoke measurements for fork centres and stem offset please?
cheers.
-
1 hour ago, Reddragon said:
Thats the original problem, the r 1 stem is too short for the bandit headstock
Ah ok, read it as bandit too long, missed the bandit frame bit.......
-
Why not use a slingy stem? tis shorter.....
-
Would this work? Half the ignition mount........
-
1
-
-
This help?
-
3
-
-
On 29/09/2017 at 5:31 PM, clivegto said:
Cut the the torque arm bracket of made a jig & got the swinging arm welded up at the spindle point. Have just about got the cut down sub frame & brakets ready for welding as well.
Blue supervising.........
-
1
-
-
Leak down tester will give you answer......
-
Just put them in the sea of VW t5s like Donington......Oh and a vivaro lol.
-
1
-
-
Roll on next issue
-
2
-
-
55 is tl or busa.
-
The forks........750 and 1000 are different sizes......
-
LOL maybe should have brought forks with you........k8 yoke needed......guess yours are 54mm?
-
1
-
-
Should work.......:)
-
1
-
-
Shorten bandit stem. all bearings are same.......harris top bearing size?
-
1
-
OSS.info get together
in Events
Posted
In the badlands.....over t m62...