yyt Posted October 19, 2018 Posted October 19, 2018 I need to replace my slabby's alternator regulator, any one know the spec. of the IC regulator or where to get one? I tried to replace it with universal regulator, it worked according to the test set up in the manual but when i started the engine the voltage went up to +16V so i stopped the engine. Quote
CockneyRick Posted October 19, 2018 Posted October 19, 2018 Been her myself, the part is hard to find & expensive. Best off sourcing another Alt & swapping the whole lot out. IIRC all the Alts are the same but the gear has different teeth counts, so get one & if necessary swap the gear Quote
yyt Posted October 19, 2018 Author Posted October 19, 2018 Thaaaaanks Rick, Your answer really pissed me in a good way.. I spent all last week digging trying to find the right regulator, trying to figure out all the wiring to get it right and fit the damn thing in. Just now i found this combination: https://www.carmo.nl/userfiles/file/plaatjes/CARRG251 Voltage regulator carmo.pdf I ran to my bike, took off the back housing..... and all was good.. its 14.5V. Its past midnight here, so tomorrow i'll clear some space between the housing n the regulator. So again.. Thanks Rick, 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.