Swirl Posted January 18, 2018 Posted January 18, 2018 A mate has installed a dothead on his b12, installing flatslides off a slabbie, the inlet manifolds don't sit right anyone had this problem Quote
Mole28 Posted January 18, 2018 Posted January 18, 2018 Slingshot inlet rubbers are for 36mm CVs and are too big for VM29s from a Slabbie. If he has put the Slabbie inlet rubbers on and the carbs don't fit, then he has got them in the wrong order. Quote
Swirl Posted January 18, 2018 Author Posted January 18, 2018 He said the o rings on the back of the rubbers don't seat properly, not sure what the other set of rubbers are but they are oilcooled and fit the external diameter of the carbs, the other are b12, so he needs slabbie rubbers Quote
Swirl Posted January 18, 2018 Author Posted January 18, 2018 8 minutes ago, Mole28 said: Yup. I have some if he needs them. How much posted Ch659eb Quote
Mole28 Posted January 18, 2018 Posted January 18, 2018 I'd swap 'em for the slingy or bandit ones. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.