Reelinfeele Posted December 17, 2016 Posted December 17, 2016 Hey all, my ED is back up and running with the 36 flatslides. Anyone else running 1170 wiseco with rs36's? I am running 125 mains, needles in middle and pilot screw at about 3/4 out. Bike still seems to stumble at part throttle. Carbs were purchased new, I only switched down to the 125's. Floats at 17mm. Also running 50mm stacks with ram air filters I am pretty sure I have the acceleration pimp set right, 1/4 throttle on 3/4throttle off. Runs awesome after the initial 1/8 the trottle. Plugs have good color. I am at sea level. Looking to see where you might be. Quote
teltwosheds Posted December 18, 2016 Posted December 18, 2016 I found the best way to sort out low throttle settings was to get myself a colour tuner Quote
Suban12 Posted December 18, 2016 Posted December 18, 2016 Try messing with the pilot screw.These carbs are real sensitive to pilot screw settings.Try half turn and see if any different. Quote
teltwosheds Posted December 18, 2016 Posted December 18, 2016 (edited) https://www.youtube.com/watch?v=Y9t8XhFlKbk I know it ain't suzi but too late in day to bother finding one Edited December 18, 2016 by teltwosheds RTFR Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.