Jdeac1981 Posted August 4, 2016 Share Posted August 4, 2016 Hi all, been doing a search to see if both the top and bottom headstock bearings on a 750m can be made to be 30mm id from what I have read they can but just want to double/triple check. cheers all Quote Link to comment
Del Posted August 9, 2016 Share Posted August 9, 2016 (edited) Just use the stock 750m 32006(It is already 30X55X17) taper bearing on the bottom yoke.And a 32906 taper bearing from Marksman for the top bearing http://shop.marksman-ind.com/99-3540-5-30x47x12-taper-roller-bearing-32906-15086-p.asp Edited August 9, 2016 by Del Quote Link to comment
Jdeac1981 Posted August 9, 2016 Author Share Posted August 9, 2016 I thought I was right. That's across all forks sad through to the k series yes/no Quote Link to comment
Del Posted August 11, 2016 Share Posted August 11, 2016 On 09/08/2016 at 6:42 PM, Jdeac1981 said: I thought I was right. That's across all forks sad through to the k series yes/no Yep,96 srad onwards Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.