Jdeac1981 Posted August 4, 2016 Posted August 4, 2016 Hi all, been doing a search to see if both the top and bottom headstock bearings on a 750m can be made to be 30mm id from what I have read they can but just want to double/triple check. cheers all Quote
Del Posted August 9, 2016 Posted August 9, 2016 (edited) Just use the stock 750m 32006(It is already 30X55X17) taper bearing on the bottom yoke.And a 32906 taper bearing from Marksman for the top bearing http://shop.marksman-ind.com/99-3540-5-30x47x12-taper-roller-bearing-32906-15086-p.asp Edited August 9, 2016 by Del Quote
Jdeac1981 Posted August 9, 2016 Author Posted August 9, 2016 I thought I was right. That's across all forks sad through to the k series yes/no Quote
Del Posted August 11, 2016 Posted August 11, 2016 On 09/08/2016 at 6:42 PM, Jdeac1981 said: I thought I was right. That's across all forks sad through to the k series yes/no Yep,96 srad onwards Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.