Dismantling slabby flatties

[Leblowski]

In the middle if dismantling my slabby flatslide carbs.

Am i right that i need to take out the linchpin and after that i can take out the axle ?

any pointers for a way to take out the linchpin ? 

Other question 

where can i buy a revision set for the carbs for a decent price ?

thanks in advance.

[kokolis]

You just hit it with a pin, can be reused, google for the kit, but it ll cost 40/50 euro per set

[Leblowski]

Will get a tool to remove the pin thanks you.

Already googled for a set but the one i can find doesnt have al the gaskets i want also the short fuellines arent in there so not a good kit imho. only 50% of what i need is in there.

http://www.wemoto.com/bikes/suzuki/gsxr_750_f/1985/picture/carburettor_gasket_and_float_valve_kit/

So if anyone has a link to a full kitt much appreciated.

 

Edited May 25, 2016 by Leblowski

[kokolis]

The short fuel lines are pina to find try an automotive shop, bike shops dont have them.

[Quist]

Contact FrankMXparts, Mikuni and Keihin dealer and can get any part you want (Y) genuine.

[Leblowski]

I did today Pep bloody 170 euro for the stuff i want !