Leblowski Posted May 24, 2016 Share Posted May 24, 2016 In the middle if dismantling my slabby flatslide carbs. Am i right that i need to take out the linchpin and after that i can take out the axle ? any pointers for a way to take out the linchpin ? Other question where can i buy a revision set for the carbs for a decent price ? thanks in advance. Quote Link to comment
kokolis Posted May 25, 2016 Share Posted May 25, 2016 You just hit it with a pin, can be reused, google for the kit, but it ll cost 40/50 euro per set Quote Link to comment
Leblowski Posted May 25, 2016 Author Share Posted May 25, 2016 (edited) Will get a tool to remove the pin thanks you. Already googled for a set but the one i can find doesnt have al the gaskets i want also the short fuellines arent in there so not a good kit imho. only 50% of what i need is in there. http://www.wemoto.com/bikes/suzuki/gsxr_750_f/1985/picture/carburettor_gasket_and_float_valve_kit/ So if anyone has a link to a full kitt much appreciated. Edited May 25, 2016 by Leblowski Quote Link to comment
kokolis Posted May 25, 2016 Share Posted May 25, 2016 The short fuel lines are pina to find try an automotive shop, bike shops dont have them. Quote Link to comment
Quist Posted May 25, 2016 Share Posted May 25, 2016 Contact FrankMXparts, Mikuni and Keihin dealer and can get any part you want (Y) genuine. Quote Link to comment
Leblowski Posted May 25, 2016 Author Share Posted May 25, 2016 I did today Pep bloody 170 euro for the stuff i want ! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.