Boogieman Posted April 2, 2016 Share Posted April 2, 2016 (edited) Hi, live got a slabby with an 1127 engine in it. It has slabby exhaust and carbs/air box. I've managed to source a freer flowing 4-1 exhaust and a set of 36mm CV's from a GSXF750. I'm looking at fitting the exhaust and running velocity stacks with ram air foam filters. What I want to know is- what size main jet is a good start for this setup? cheers Edited April 2, 2016 by Boogieman Quote Link to comment
SFC Posted April 2, 2016 Share Posted April 2, 2016 on my 1200 with 36mm carb's , free flow zorst and ramair filters i have 155 mains , 2.5/3 turns a/f mix and 2nd groove from bottom on needles ...not saying its right but you will be close, mine is a little rich and does need a set-up Quote Link to comment
Boogieman Posted April 3, 2016 Author Share Posted April 3, 2016 Legend. Thanks for the info. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.