Jump to content

Jetting question.


Recommended Posts

Posted (edited)

Hi,

live got a slabby with an 1127 engine in it. It has slabby exhaust and carbs/air box. 

I've managed to source a freer flowing 4-1 exhaust and a set of 36mm CV's from a GSXF750. 

I'm looking at fitting the exhaust and running velocity stacks with ram air foam filters. 

 

What I want to know is- what size main jet is a good start for this setup?

cheers

Edited by Boogieman
Posted

on my 1200 with 36mm carb's , free flow zorst and ramair filters i have 155 mains , 2.5/3 turns a/f mix and 2nd groove from bottom on needles ...not saying its right but you will be close, mine is a little rich and does need a set-up

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...