Davy1100 Posted February 9, 2016 Share Posted February 9, 2016 im doing a full strip an rebuild theres a small security screw at the side of fork tube were the damping adjust screw is can this be removed and does the damping screw come out for cleaning checking etc fitting full bush and seal kit Quote Link to comment
banoffee Posted February 9, 2016 Share Posted February 9, 2016 Might be worth mentioning which forks you have. 1 Quote Link to comment
Davy1100 Posted February 9, 2016 Author Share Posted February 9, 2016 sorry i put it in the tag 1100k standard forks Quote Link to comment
Davy1100 Posted February 21, 2016 Author Share Posted February 21, 2016 has nobody fully stripped there gsxr 1100 k forks any info would be much appreciated Quote Link to comment
Fula28 Posted February 21, 2016 Share Posted February 21, 2016 (edited) I stripped k forks the adjuster comes out with some care! I just put myn in ultrasonic bath with soapy solution cleaned up a treat. The brass slotted screw siezes up over time and had to cut trim some alloy away with junior hacksaw, on one to get it freed off. works a treat once you have this out you can clean and re -o ring it lots rubber grease and reasemble. There not best forks std I ran k-tech springs and different internals I myn. Edited February 21, 2016 by Fula28 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.