jellybeans Posted Saturday at 05:08 PM Share Posted Saturday at 05:08 PM (edited) Hi guys, new bandit 600 owner (2000) here looking for help with a new ignition switch as the old one was buggered. I have the 'correct' part but it seems to be an NC rather than NO as per the original. This means all the functions are reversed and I have to turn the key to parking light position to get it to start. Is there a way that I can reverse or rewire the connector to get it to behave normally? I've seen thousands of these switches sold online but for the life of me cannot find a solition yet, so any help you can give would be ace. Thanks! Edited Saturday at 05:09 PM by jellybeans Quote Link to comment
Upshotknothole Posted Saturday at 06:25 PM Share Posted Saturday at 06:25 PM Find a wiring diagram and you can swap the wires around in the plug to the correct order. Or I think you can remove the electrical part of the and swap them between ignitions. Quote Link to comment
jellybeans Posted Saturday at 08:00 PM Author Share Posted Saturday at 08:00 PM Hey upshot thanks for the reply. Just got back in after solving it by putting the new barrel into the old housing. All good now. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.