jellybeans Posted June 15 Posted June 15 (edited) Hi guys, new bandit 600 owner (2000) here looking for help with a new ignition switch as the old one was buggered. I have the 'correct' part but it seems to be an NC rather than NO as per the original. This means all the functions are reversed and I have to turn the key to parking light position to get it to start. Is there a way that I can reverse or rewire the connector to get it to behave normally? I've seen thousands of these switches sold online but for the life of me cannot find a solition yet, so any help you can give would be ace. Thanks! Edited June 15 by jellybeans Quote
Upshotknothole Posted June 15 Posted June 15 Find a wiring diagram and you can swap the wires around in the plug to the correct order. Or I think you can remove the electrical part of the and swap them between ignitions. Quote
jellybeans Posted June 15 Author Posted June 15 Hey upshot thanks for the reply. Just got back in after solving it by putting the new barrel into the old housing. All good now. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.