JimmyJazz Posted May 7 Posted May 7 Hi All, Just finishing off a 1984 GS125 for my youngest. Had the loom on the bench and had everything working but now it's back on the bike everything is fine except for the indicators that don't work at all. Relay seems fine. All bulbs light when attached to my bench supply. Measuring 9.5v at the relay - is this an issue? Should it be 12v? If so, any ideas what might cause that and would it be enough for the lights not to work at all? Any advice welcome - it's driving me mad! Cheers, James Quote
Gixer1460 Posted May 8 Posted May 8 9.5v is an issue - should be 12v or battery voltage! If you've got voltage drop its usually high resistance somewhere - either bad connection / corroded connection / bad earth. Usual indicator circuit is battery+ to fuse, fuse to relay, relay to ind. switch, ind switch to bulbs, bulbs to ground. So + volts are only required between battery and relay, so that's where i'd be looking first. 1 Quote
JimmyJazz Posted May 11 Author Posted May 11 say what now!?, thanks for that. gives me something to do tonight! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.