alfiestorm Posted January 14 Posted January 14 I am working on a mates rg250 with him and doing a oily rag restomod on it, We have a complete Yamaha R1-Z250 front end to go on to get shot of the standard 16" wheel and crap brake set up so the front is sorted. Left us thinking about the back end and their is not a lot of room to fit anything bigger than a 120 tyre in there. Would anyone know if a swingarm off of an RGV VJ21 will fit in the RG frame ? or any other swingarm that will allow a 17" x 4 or 4.5" rim and a 140/150 section tyre. Something I just remembered is the original rear wheel is an 18" so maybe a 17" wheel will allow a 140 section tyre as it will sit further back in the standard swing arm? Any ideas or advice will be much appreciated. Quote
bunk Posted January 14 Posted January 14 VJ21's are 18 inch rear wheel. 22's are 17. Do you know how wide your swingarm is on the frame end? Quote
alfiestorm Posted January 16 Author Posted January 16 On 1/14/2024 at 8:10 PM, bunk said: VJ21's are 18 inch rear wheel. 22's are 17. Do you know how wide your swingarm is on the frame end? Not yet, getting into the bike at the weekend. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.