Project Powered by oldskool

[Guest]

Hi all, my names phill and I was previously on the pro boards forum. I think now the new forum is running its time to actually set up a project page  

ok ok so project powered by oldskool isn't the usual thing on here, and after reading the rules I'm a little worried it'll be deleted. Firstly yes it is a car but at its heart is a gsxr 1127 motor. The ultimate plan is to slightly tinker with the motor to produce in the region of 300bhp via a 1216cc turbo set up. 

But this summer I'm just happy to get it running. 

The story so far:

 

After my friends dad sadly passed I found myself the new owner of a legend series race car. Little rough around the edges but it has potential.

So once it was home I started to look past the Orange paint and chicken mesh front screen.

Looking inside I could see the floor needed replacing and the wiring sorting out.

Also it had no mirror which are required if I wanted to take it on track.

A quick rummage around and I found some from a hayabusa.

I also found a volt gauge so i decided to fit it and the oil temp guage that was laying on the floor.

Now for that floor, I cut out the rusted holes and primed it.

Little bit of work later this was the finished job. 

Now time to open the boot and see what we have  

no problems here apart from the need of a new battery. 

So I thought that was enough work for one weekend and packed her away. Here a pic of her next to my sv650s so you can get a perspective of size. 

[KATANAMANGLER]

Thanks for sharing your project but I'm afraid it's not for this forum. Happy to help with the engine though