wraith Posted December 13, 2015 Posted December 13, 2015 I've got 2 oilcool motor clutch slave cylinders and I don't know what there off, one has a 38mm piston and the other has a 35mm piston. Has anybody got any ideas what there off? I can then put new seals in them, well one of them for the time being. Cheers Quote
VJ Posted December 13, 2015 Posted December 13, 2015 I think the bandit 1200 was 35mm, not 100% sure though Quote
wraith Posted December 13, 2015 Author Posted December 13, 2015 Cheers, I don't know where I may have got that one from as the only oil -cooled motors I've had are gsxr750, gsx750f, gsxr1052 and the 1127. May have come with one of the job lots at some point over the years? :) Is there any other way of ID-ing them? Quote
VJ Posted December 13, 2015 Posted December 13, 2015 hmm, robinsons foundry might be of some use, http://www.robinsonsfoundry.co.uk/content/pages/home/advanced-search.htm?search=23160-06B00&search_products=yes&search_pages=yes&search_groups=yes&search_new_bikes=yes&search_used_bikes=yes&match=all_words&submit.x=17&submit.y=11 b12 one is the same part number as rf9/gsx14 and the busa. Quote
wraith Posted December 13, 2015 Author Posted December 13, 2015 Cheers, Tried Robinsons, but the man I spoke to had just come from working at Ducati and did not know his way round a Suzuki so was not much help! Have ordered stuff from them in the past and they are usually good and lots of help, but have spoken to this man 3 times over the last 6 or so months and 2 of my orders have had to be re-sent as they came wrong. He is getting better... :) Quote
VJ Posted December 13, 2015 Posted December 13, 2015 Yeah I know what you mean, id have thought they'd have employed someone with a little more relevant knowledge but at least they are learning. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.