nickyboy.4 Posted May 12, 2020 Posted May 12, 2020 Looking for a bit of advice with a project i've just bought, thought it was a 1200n but it's a sv, you can see it's present state but i'd like to put it back to standard or to a naked. What bits are interschangeable between the s and n, do they share the same seat panels, forks and tank and loom? Thanks in advance
fatblokeonbandit Posted May 12, 2020 Posted May 12, 2020 (edited) S = faired N = naked 1996 = T 1997 = V 1998 = W 1999 = X all the bits are the same for all mark 1's except the 1995 1156cc pre production models that have various differences.. faired looms have longer bit at the front to reach the faring but work exactly the same.. How much for the front end Edited May 12, 2020 by fatblokeonbandit 1
nickyboy.4 Posted May 12, 2020 Author Posted May 12, 2020 thanks for that, i'm trying to work out the best way of going about it at the moment with regard to cost, i'll let you know first if i ditch the forks! 1
fatblokeonbandit Posted May 12, 2020 Posted May 12, 2020 cost wise, sell that and buy a standard one is the cheapest way
Recommended Posts