Slabby 1100 swingarm in a 750 frame

[OldKat]

Hi All

Are there any mods needed to put an 1100 Slabby swingarm in a 750 Slabby frame? 

Thanks all.  

Edited August 6, 2019 by OldKat
Wording

[banoffee]

Broken record

OSS isn’t just a forum... look at the front page and the vault...

/Broken record

 

http://oldskoolsuzuki.info/wp-content/uploads/2015/10/Swing-Arms1.pdf

[Racer-X]

Hi oldkat, i have an 1100 slab swinger in my 750 slab. It went straight in no mods. I did have to use the 1100 shock linkage but that too went straight in. Unfortunately I can't tell you how it effects ride hight as I have a one off top shock mount. Hope this helps, sometimes it quicker to just ask rather than spend ages searching past posts.

[OldKat]

On 8/6/2019 at 10:10 PM, banoffee said:

Broken record

OSS isn’t just a forum... look at the front page and the vault...

/Broken record

 

http://oldskoolsuzuki.info/wp-content/uploads/2015/10/Swing-Arms1.pdf

Thanks Banoffee, appreciated. 

[OldKat]

On 8/18/2019 at 11:10 PM, Racer-X said:

Hi oldkat, i have an 1100 slab swinger in my 750 slab. It went straight in no mods. I did have to use the 1100 shock linkage but that too went straight in. Unfortunately I can't tell you how it effects ride hight as I have a one off top shock mount. Hope this helps, sometimes it quicker to just ask rather than spend ages searching past posts.

Hi Racer, spot on! Thanks buddy... I have the linkage as well as the arm. Chuffed.