-
Posts
73 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Gixerjonah
-
-
Could anyone please confirm the fork leg diameter of an 1100M is 52mm ? (for clip on fitment) Thanks in advance.
-
Nice one Crass. for what sounds a simple fix, its a right pain aint it !!!!
-
Cases
in Oil Cooled
Could someone inform me if the ignition & starter clutch cases on an 88 slabby 1100 are the same as an 1100m slingy ? Thanks in advance.
-
Can anyone help me with a paint code please. Its for the black wheels (which are now red) on my 1100M. Thanks in advance.
-
Nice bike n pics Trigger.
-
1
-
-
That fat bloke on a bandit knows what hes on about !! Go to a reputable dyno, its the quickest & best way.
-
Totally agree with Quist. when using stainless bolts ceramic grease is far better than copperslip. Have been using it for a while now with not a prob.
-
Fuck me sideways your a brave man !!! Goin to be watching this with interest. Full marks for enthusiasm !!
-
1
-
-
If i were to fit GSXR1000 headers to my 1100M, what link pipe would be required in order to fit a Yoshi RS3 can ? Cheers fellas.
-
They do fit, you'll just have to adjust your rebound and damping.
-
Oh my goodness me !! In my humble opinion this bike sums up OSS !! Think its gorgeous !!
-
Am i right in thinking that headers from a GSXR 1000 K2~4 will fit my 1100M ? Do any other headers/collectors fit allowing a 4 into 1 and the bottom fairing / bellypan to fit ?? Thanks fellas.
-
Ha Ha Ha, What you saying Captain !!!??
-
So Del, i should be ok with the 1100Ms hoses on a Bandit sump with Bandit oil pick up ?
-
Thank you Del.
-
Im looking to swap my 1100M sump to a Bandit 1200 sump for tighter exhaust fit, do all models fit ? Does anything else differ ie oil pick ups ? Thanks fellas.
-
Thanks oilyspanner. Think im going to stick with em & have em cleaned & refurbed. Ive been saving & working overtime for ages & am now about to have a Racefit legend made & fitted, do you think dyno time will be needed after for changes ?
-
Is it whining like a jet engine trying to start? If so its like Gixer1460 says, the starter clutch retaining bolts worked loose.
-
Is it generally accepted that 38mm Mikunis are a better option than the standard 40s on the 1100M ? Im having a right mare with mine and thinking of changing em.
-
Not 100% sure on that one but would assume so.
-
The WN stand measures in at 240mm from the center of the bolt hole to the knuckle of the foot, and 270mm to the tip of the foot. So a lot longer than yours.
-
Having problems with the side stand switch or rather the bracket on the WN stand wont reach it !! Can it be bypassed (the switch) or is a bit of grinding & welding in order ?
-
What model 750 was that Stoney, WN WP ? or will any of the water boilers do ? Just need summat slightly longer that'll go straight on.
-
Anyone help please ? Is there a straight swap sidestand from any other bike (maybe slightly longer) that would fit my 1100M ? Thanks in advance.
Fork Leg Diameter
in Oil Cooled
Posted
Thanks large gent on a Blandit, much appreciated.