[1100 et generator cover]

Bugger.

[1100 et generator cover]

Are the generator and clutch cover the same for both 750 and 1100  ETs. Thank in advance. Merry Christmas.

[EFE outrigger]

Try www.d&gchassis.net. May get some ideas from them, good luck.

[ET Clocks]

There are two kinds of clocks on ETs, one has a drawing of a bike and the other has a gear indicator. Am I right in assuming the later of the two is for a 750 and the first for the 1100. Thanks

[Quest for Speed]

Bloody brilliant 

[Removing second gear]

Is that a track rod end splitter you would use on a car. If it is you should be able to get one from local car discount shop.You could try local engineering shop, most have a small press.

[Best supplier for gsx1100et standard rocker arms]

P S He done the ones on me ET, does a good job and reasonable too.

[Best supplier for gsx1100et standard rocker arms]

If its just the faces that are worn, you could send them to joy engineering  01279 730682

[petrol cap barrel]

If you have sussed it, would you like to tell the rest of us. I would like to get mine rechromed.

[750/1100 ET]

Thanks for the info everyone, now I know what NOT to look for.

[750/1100 ET]

Could anyone tell me what differences they are between the 750/1100 et, besides the engine. Are the fork dia the same,calipers,discs etc. I know the engine mounts are different but not much else.Thanks in advance.

[et engine finish]

If you want better than original try Steve Smethurst at WWW.ALOH.CO.UK  Salford

[my sick GSX]

PS What sort of frame mod.

[my sick GSX]

Hi, thanks for replies, could you tell me what size tyre and wheel you are useing. At the moment I have a 4.5 inch wheel in the arm with out a  tyre and everything is ok, but when I put the 5.5 wheel in chain(530) is to close to tyre/frame etc.I know I would have to use an offset  eng sprocket not a problem. Thanks.

[GSX1100et Battery killer]

Good info to be stored for future.

[my sick GSX]

If you built this bike could you tell me how you fitted the rear wheel into the ET swingarm, what clearance is there between tyre/chain etc. Thanks in advance.

[Mikuni RS flat slides on GSX1135]

I use standard inlet rubbers on my ET head,with 38m flatslides. When you fitt them use red rubber grease, makes them fitt easer.

[Over bore to 1168, worth it?]

If you ever have to take the head of for any reason ALWAYS renew the o rings, saves having to bugger about later on,good luck.

[gsx insurance]

Suzuki vintage insurance scheme offering bespoke policies for bikes 20 yrs+. Suzuki-gb.co.uk

[ET tanks]

Used to live in OZ close to Oran park,is this were the 6 hour was ??

[Bandit front end swap 4 piston nissin rattle]

Just a guess but is there supposed to be a shim between piston and caliper ?.

[gsx 1100 et seat are they the same as a 750 seat ?]

The ET on the top of this article is similar to the one I am trying to build, does anyone know anything about the rear wheel set up. According to the article in the Practical Sportsbike mag(feb 2013) the rear wheel is a GSXR750  5.5 x 17 with a 180/55 tyre. I have same size wheel (5.5 inches were tyre sitts 6.25 outsides of rim) and tyre and I cannot it anywere near central. any help welcome

[Rear Wheel]

Thanks for the reply, could you tell me what size the wheel and tyre are. 

[Rear Wheel]

Could someone help me out here please, I am trying to put a 4.5 inch rim in to a GSX 1100 ET swingarm but not sure which model I need to look for. Could someone point me in the right direction please.

[gsx 1100 et seat are they the same as a 750 seat ?]

Thanks Berty, now I know what to look for.