[Service manuals]

3 hours ago, zedhead said:

So what is #2 on the AlphaSports exploded drawing?...

There has to be something there surely.. or else you’ll strain / fuck the bearing if you over tighten the spindle

[Awesome Oilcooled Pics]

[Service manuals]

Cheers for the response chaps..

I think I’ve decided to sack the SRAD forks idea and get the slingshot forks back in there.. they do have a bit of pitting on the stanchions but I might just get away with it.. 

[Service manuals]

4 hours ago, stellafella said:

Ive used carl slater.com to download manuals mate,  alphasports or a good suzuki website should give you an parts drawing of an srad front end.

Cheers Bud.. that’s great

[Service manuals]

11 hours ago, CockneyRick said:

I might be shouted down, but the 11M wheel in Srad ain't easy. Better off with the proper wheel tbh. 

If it's so you can run the speedo, then go back to Slingy forks. 

The Srad "spacer" is actually the nut that is gripped by the fork bottoms & screws onto the spindle with the spacer as part of it.

Thanks M8, I was beginning to regret the whole idea.. actually it was the inner wheel spacer between the bearings I was looping for.. 

I’ve still got all the stingy bits so might just go back to that idea.. I bought the Srad forks cos the stansions are a bit pitted on the slingy ones and thought it would be an easy swap not realising that I’d have to swap everything ..  just my luck.. cheers for the advice Pal..x

[Service manuals]

L O All, it’s been a while since my last post and I do try to be as independent as possible but I’ve just purchased a very clean and original 1990 slingshot and need to do a few small jobs so can someone please point me in the right direction for a gsxr1100L workshop manual download.. and also a 1999 Srad 750 manual or exploded drawing of the front end... I’m fitting 1999 GSXR 750 forks with a 1100 M wheel so need to see the spindle spacer, can’t find one anywhere.. I have the spindle and bearings but no spacer.. 

thanks in advance..XxX