-
Posts
51 -
Joined
-
Last visited
Reputation
36 ExcellentAbout Peterv
- Birthday 03/26/1965
Personal Information
-
Location
Belgium
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
-
Cheers dave , I'll keep you in mind when I start the build I will make a list of all the things I need , we can agree on a price , and ship all at once.. cos you funny lot no being part of the EU no more (and how I wish we did the same..) shipping from EU to UK and virsa versa is a real rip off.. They charge me 21% taxes and 18 euro custom fee's on top of the shipping ...those Eu beaurocrats are screwing us over like there's no tomorrow.. cheers Peter
-
Yeah that is what I read also over here , about the airbox , thing is , it has these chrome sidecovers , and I absolutely HATE chrome on a bike (a chopper isn't a motorbike baby...;-) and take away these covers and it just looks like a big lump of plastic.. Also when I put the bike back on the road it has to be Mot'd again , and with all these EU inviromental shit I don't know if it will pas without an airbox.. I think I should take it firts there and then do the airbox , but then the engin needs to drop ..if all is painted and such ..not a nice option.. I do some carbon work on the side , maybe I'll take mold of these chrome things and replace them with carbon , I'm sure there is a market for these aswell.. cheers Peter
-
I don't think I will modify the frame Tony , I would have to cut the beams on the top of the frame , and so will drasticly weaken the frame , cos on the top beams is where all the strengt is... I think it would be easyer to fit a inazuma engine in a ET frame , but there is about 20 years of frame technology between a ET and a inazuma..and we all know the 80's jap frame reputation ...Martin , Bakker and other frame builders did good business then.. cheers Peter
-
Hello Folks wanne do a major overhaul on a misused/raped Inazuma (someone made chopper out of it) I posted the pictures here before.. I know lots of engine parts are the same from oil cooled gsxr and bandit but I have other parts to be hoarded so I can begin .. the peg assy's are no longer there because the dude made a forword control unit , so wich assy's can be used , ? are the bandit's interchangeble ? or even the GSXR one's? I would like to have a pair of nice second hand fancy aftermark items , not the boring oem stuff.. so this is mostely done on bandit's and gsxr's The left and right handle control units have been cut and lenghtend by half a meter to get this ape hang handlebar mounted...(don't ask..) So I wont cut them again and solder the lot togheter , wich really is a breakdown waiting to happen..they are about 50 euro a pair so just need to know if they are the same on the bandit/gsxr and also the water cooled models? I noticed there is a choke lever on the left swith unit.. The headers seem heavy aswell , I have my eye on a COMPLETE devil 4-2-1 system , from a oil cooled gsxr , the headers should be no problem me thinks , but will the rest have the clearance under and of the side off the bike? Did someone mount a header or a complete system from an early gsxr1000 aswell , they have standard oem titanium headers wich are being sold at the moment for the price of scrap metal..don't know if they have the same spacing or clear the engine at the bottom thouw.. also don't like the tank , to ballooney for me , will a gsx1400 tank fit with not lots of trouble? (I'm working on a gsx1100et tank to fit at the moment but have lots of issues..) cheers Peter cheers Peter
-
Thanx Joseph But I also have a non rusted spear tank , just to be sure... But I'm on quest... I hope to get this one closed and good for life... after I closed it up I will do the inside with a anti rust treatment and fuel liner . her I am sofar..the bottom plate is reworked with new 0.8mm sheet metal wich I hard solderd on , using silver as a bond and the copper/silver to fill up bigger gaps I have no tig/mig welding devises at my disposel , but hard soldering is very commen on repairing steel gastanks It uses not as much heat as you would flame weld , so the material does not deform as much also.. here I am so far
-
Yeah tony I got this one for free.... I need to sharpen up my sheet metal skills anaway.. If all goes pear shaped nothing lost..only the wiser cheers Peter
-
Hello Guys I am restoring a quite rusted gastank from an ET model.. I am gonne use it on my inazuma/et build. I know I will have to modify the tank to fit the inazuma frame aswell.. I have no petcock for this tank and wonderd what you guys are using for replacement.. I recon after 40 odd years those thing needed replacement anyhow... The one currently in my inazuma has differant mounting dimensions (45mm instead of 50mm) the inazuma one (needed for my inazuma carbs) has just the on/off and reserve setting..no vacuum tube model. Here is the work so far.. I managed to remove the stuck bolt aswell from the petcock mounting.