-
Posts
86 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Cluffy
-
-
Cheers Clive I'll start scouring evilbay
-
So I have a MK1 bandit6 frame.
Gonna swap the current unknown 1052 motor for a known powerscreen motor... I have the B6 sump to swap over as well.
My current 4-2-1 exhaust is really nice but has buggar all clearance on the sump. It makes oil changes an absolute ball ache having to take the exhaust off to drain the oil or change the filter etc...
What exhausts have longer down pipes? Who has some for sale etc....
-
Good info to know. Cheers :-D
-
-
On 28/12/2017 at 4:51 PM, riversbikes said:
I see some Hel kits -- 19 row oil coolers with aeroquip lines. Hel makes quality stuff... a good place to start?
Aye but the HEL stuff is expensive have a look at mocal coolers and source the linrs else where. As big a diameter as you can i think the HEL coolers run AN-10 fittings n lines. IIRC the cooler take offfs from the sumps are M22 x 1.5mm. Torques UK on Eblag generally seem to be good quality for the money.
-
On 6/19/2017 at 9:02 PM, wraith said:
You could always convert the hydraulic to cable by using a b6 or gsx750f sprocket cover.
I run cable on all my engines using this setup. I originally intended to put on a hydraulic at some point but I prefer the cable feel.
-
Lol I didn't buy it in the end. I can get you the why username of the guy who was selling it.
-
-
Awesome build mate. Where are ya? I'd love to pop in n have a gander if I'm passing.
-
Cheers.
It ended up being too much for me. Also it wouldn't handle the power from a slab11 turbo lol
- 1
-
R1guy. I've found a rolling chassis fitted with a CB900 and I fancy summat different in it. I just never heard of Tony foale before this evening.
-
Cheers bluedog.
I shall find him.
-
Does anyone have any experience putting a oil cooled gsxr engine in a Tony Foale beam frame?
-
Pj1
in Oil Cooled
Simmoniz is now meant to be one of the best engine paint available but bloody pricey. Never used it.myself but been looking for a replacement for PJ1
- 1
-
FCUK
in Trick Frames
This was mine, Built by Doug @ Badger Motorcycles in Ipswich. Slabby 1052 engine, some hideously loud american exhaust (Mucho Fun), tankshop ally tank, aprillia RS125 seat, lots & lots of small one off bits as featured in 100% Biker or streetfighters or possibly even BSH - it was in one of them that Nik Samson was doing at the time. God I miss it. If anyone knows of another going for relativly sensible money let me know I have a credit card burning a hole in my pocket :-D
- 8
-
Was chuffed for.you Kev.
-
I have the wrap around bars on my bandit. Fits all the gsxr oil cooled stuff and trust me they work better than crash bungs.
-
Very under rated bikes
- 1
-
So what's the optimum compression ratio for a gsxr 1052 with possible big bore and low comp pistons? I thought approx 9:1 ??
-
FCUK
in Trick Frames
Having owned a moto martin.... they're awesome. The worst thing I ever did was sell it.
- 1
-
Bloody hell Yanny you have some skill. Very impressive.
-
200+ mph is on it's way then 8-)
-
I'm hoping Kev will post one up once it's been edited.
-
Congratulations mate. That's a he'll of a run. Am well chuffed for you after yesterday's wash out.
Dyno Day 2021
in Events
Posted
I'm up for that. I'll even book the Friday & Monday off work lmao.
See ya there folks.