Alex
-
Posts
49 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Alex
-
-
-
Hello all. Would a 17t front sprocket fit on the b12 without hitting the clutch push rod? Thanks in advance alex.
-
Hello all.
are gsxr750 k1 k2 front wheel the same as gsxr1000 k1 k2 ? -
As you can just about see the pads are not running on all of the disc. Bandit front wheel. Bandit disc. 750k1 forks. Don’t know what calipers they are yet.
-
Hello all. Does anyone know if a gsxr750 k1 front disc hub hole and pcd and possibly offset are the same as b12 mk1 I know the gsxr disc is 10mm bigger. I brought a bandit with 750 front end but it has bandit discs . Thanks in advance alex.
-
Hello all. I have just bought a b12 turbo and would like to know of any good swing arm conversions for it. I heard that the hayabusa arm is a good one to use? Is it a bit longer? As you can imagine it wheelies easily how much longer can the arm be before it affects cornering. Thanks in advance alex.
-
Hi all. Are the b12 mk1cdi units interchangeable with the gsxr1100/ 750 / rf900/ b6/ gsx600f etc. The first numbers on the fist two rows are the same I don't know what the rest are. Any help will be appreciated. Alex.
-
So what is it for then?
-
Hi all. I was told a long while ago that if I take the balance weight off the frame that is behind the head stock that I would get vibration through the handle bars. Is this correct?
-
Hi all. Does anyone know if a 1993 upwards gsxr 1100 swing arm fits in the b12 frame. Thanks.
-
I am running 14 45 at the moment,as I've jacked the bike up 50mm the chain is rubbing on the chain guide a lot. So I was thinking of running 15 48 which gives very close to my same ratio.
-
This should be ok then?
-
Hi all. Is the pcd the mk1 bandit 1200 the same as the gsxr 1100? Thanks.
-
Hello all. I've a mk1 b12. Has anyone fitted an electric oil temp gauge? If so were would be the easiest/ best place to put the sensor? On previous cars I've welded an adapter to the sump, would this be the same for motorbikes? Cheers.
-
Hi all . Can anyone remember if the Dyno jet springs are softer or harder than standard ones. Thanks.
-
It is a 1998. It does have the 1156 on the engine though. Is this good? Just looked at my y plate mk1 that has no numbers on the barrels just a blank rectangle where these numbers should be.
-
Hi all. Can anybody tell me why my s reg bandit doesn't have the bottom triangle engine mount on it? The frame has no holes for it either. Is it because it's an early mk1 or possibly an import?
-
Hi. Does anyone know the advantages and disadvantages of rs38 flatsides for road use over standard. I will be putting on a skimed/ported/Kent reground cams head I have a 4-2-1 acrapovic / 5deg advanced ignition. These rs38's seem a lot of money but are they really worth it for road use?
-
I have a head with 1mm skim / ported / Kent reground cams. Am looking at rejeting carbs to 150 or 155 then Dyno time. Already have 4-2-1 acrapovic, 5 deg advance timing. Just going to throw this in, are rs38 flat sides worth having now I've tuned the engine a bit?
-
Forgot to say I have a mk1 bandit
-
Are there such things as velocity stacks for standard 12 bandit carbs? Or has any one made something similar for them?
1200 bandit mk1 front sprocket
in Oil Cooled
Posted
I have a triumph t595 swing arm I need the clearance on the swing arm. A 15t rubs the chain guide to much. I need to go as big as I can on the front as a triumph has a 18 or 19. Also I am running a 247 whp turbo engine