Bubba1135
-
Posts
703 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Bubba1135
-
-
Sourced a set of these from TracTech in Canada.
Fitted last night and for me I think they look sweet.
-
4
-
-
If mines back together I'll bring it bud
-
1
-
-
Just a quick update, sorted the wires then the bloody flasher relay went.
Replaced that..all sorted, out on test ride speedo cable snapped so on the bench again and replaced that.
Let's see how this mornings test ride goes
-
4
-
-
39 minutes ago, Duckndive said:
find the 2 that are the feed and earth for the bulb and just use those
Thanks
-
It's a Netherlands import, rears only seem to have two wires, fronts have three.
-
Have fitted a set of indicators on my new efe as they weren't on when I got it.
When I put the headlight on both fronts light up, as well as the headlight, the rears don't light up unless activated.
Am a bit stumped, any help would be much appreciated.
-
Hi Clive, would you be able to send me the measurements and I'll check the gold spots.
Cheers
Gav
-
Has anyone fitted a set of R1 Goldspot calipers to standard EFE forks, if yes would anyone have a template for the brackets required.
Thanks
-
1 hour ago, Swiss Toni said:
Like this? Loved it!
I want a matching pair, sad but hey-ho
-
1
-
-
Arrived last night from Grumpy1260, delivered by Moto All couriers.
Next dilemma is stock or tinker with, @HavocTom I might be in touch for a price to do this Blue & White like my other one.
-
9
-
-
Hoping to have a run down on the Saturday if possible, work depending.
-
4
-
-
18 hours ago, TonyGee said:
I would say its more likely to be the teeth on the gears that are a bit rough.
I had my efe do this in 3rd under load, teeth were shagged when we pulled it apart.
-
1
-
-
21 hours ago, TonyGee said:
yeah im a lefty as well, just grip nice and tight and shake it. doesn't work by the way but its fun trying
Lefty here with an EFE as well, must be those heavy clutches in common
Or fit an APE clutch cable & bracket that changes the cable run, that helps. SPS sell them, thats what I did.
-
16 hours ago, johnr said:
+1 for lucky7's work, but busa ash had some done recently in stockport that were top class too.
Saw these the other day when I was at Ash's, really nice work.
Lucky 7 did my efe seats, cannot fault them.
DP Leathers at Penrith redid my RF corbin seat, quality job at a very good price.
-
1
-
-
Well that's Ratfink now Sold, off to a new home, not to an OSS member so she probably won't appear on here again.
-
2
-
-
As above, have finally sorted the rear brake on my EFE how I wanted it. Brembo caliper with Busa hanger & torque arm with rose joints fixed to swingarm. Will need to replace the line at some point but it works for now.
-
3
-
-
On 5/1/2023 at 10:23 AM, spiderpig said:
I like the rf and they have great engines but that arse end
It grows on you...bit like middle age
-
1
-
-
Mot'd and on the road again
-
5
-
-
On 4/18/2023 at 11:40 AM, clivegto said:
Was it expensive Mr ?
£500ish including the remote adjuster if I remember correctly.
-
1
-
-
Got myself a Hagon, fitted @ works a treat.
-
3
-
-
Rf carbs are a pain at times on an RF, I wouldn't put them on something else.
You have to keep on top of cleaning & maintenance with them, they don't like sitting with fuel in at all.
-
2
-
-
Back together again
-
3
-
-
You're not wrong there chap, awesome looking things they are.
-
5 hours ago, Lewi said:
How does it sound with the racefit on?
Sounds awesome mate, well impressed.
-
1
-
Anti-dive Blockoff Plates
in Air Cooled
Posted
https://tractechmotorsports.ca/products/gs1150-anti-dive-by-pass-plates