[Slabby 1100 swingarm in a 750 frame]

On 8/18/2019 at 11:10 PM, Racer-X said:

Hi oldkat, i have an 1100 slab swinger in my 750 slab. It went straight in no mods. I did have to use the 1100 shock linkage but that too went straight in. Unfortunately I can't tell you how it effects ride hight as I have a one off top shock mount. Hope this helps, sometimes it quicker to just ask rather than spend ages searching past posts.

Hi Racer, spot on! Thanks buddy... I have the linkage as well as the arm. Chuffed. 

[Slabby 1100 swingarm in a 750 frame]

On 8/6/2019 at 10:10 PM, banoffee said:

Broken record

OSS isn’t just a forum... look at the front page and the vault...

/Broken record

 

http://oldskoolsuzuki.info/wp-content/uploads/2015/10/Swing-Arms1.pdf

Thanks Banoffee, appreciated. 

[Slabby 1100 swingarm in a 750 frame]

Hi All

Are there any mods needed to put an 1100 Slabby swingarm in a 750 Slabby frame? 

Thanks all.  

[GSXR 750 J 1988/89 Exhaust]

Cheers buddy, I’ll have a look and see what’s out there. 

[GSXR 750 J 1988/89 Exhaust]

Other than GSXR 750 J exhausts.... Would anyone know if there any exhausts headers/systems out there that could be used as a replacement? Running a full fairing so 1100 headers are out of the question. 

Thoughts? 

[GSXR750 Slingshot Cam Oil Feed PIpe Issue]

Hi Jaydee, worth a shot! Thanks bud, appreciated! 

[GSXR750 Slingshot Cam Oil Feed PIpe Issue]

I will do, thanks buddy. Useful info! Appreciated. 

[GSXR750 Slingshot Cam Oil Feed PIpe Issue]

Hiya, thank you for the message. It's an HEL type.... which one are you using?

[GSXR750 Slingshot Cam Oil Feed PIpe Issue]

Gents. Fitting external camshaft oil feed pipes to a slingshot leaves you without the fairing fixing lug for the mid fairing panel fixing point. Has anyone engineered anything  or have any ideas how to get around this? 

Thanks 

[Help.... GSXR 750 1988 K1 Swingarm Sprokets and Chain]

Yes, K1 rear wheel. That's great info... happy days... thank you! Genuinely appreciated. I'll get in touch with Talon. 

[Help.... GSXR 750 1988 K1 Swingarm Sprokets and Chain]

Hi guys, can you help please???? 

Im fitting a K1 swingarm to a 1988 GSXR750. I believe there's a mod to the front sproket and I've been advised to use a 520 chain. (I've got the rear lineage sorted - happy days)

Can anyone advise with regards to the front sproket modification and the chain length?

Also.... what's the overall preference on gearing 15/42 or? Any ideas yearly appreciated. 

Thanks. 

 

[GSXR 750M head on to a 750J bottom end.]

Scrub that, I've answered my own question. In short..... 'no'. 

[GSXR 750M head on to a 750J bottom end.]

Gents.... does anyone know what issues might arise from fitting a GSXR 750 M cylinder head to a 750 J bottom end? Good, bad, impossible? I know the compression chambers in the head are shallower in the M head = increased comprehension and the cam wheels are significantly smaller.... Presumably long stroke engine. Thoughts???

[HELP! Hayabusa swingarm on a 91 GSXR 750 trouble!]

On 08/06/2016 at 8:56 PM, WimBaas said:

Just buy the adapter plate. They are available and everything is an easy fitment. I know because I had them installed in the past. Slingshot with Busa swingarm and 6 inch rearwheel.

Hi WimBaas, where are they available from? 

[Slingshot K1 Swingarm Shock Fitment]

Thanks buddy! 

[Slingshot K1 Swingarm Shock Fitment]

I'm inclined to agree but the demon inside my head keeps telling me to hang in there. Do you know if anyone out there is making the lower adaptor plate? 

[Slingshot K1 Swingarm Shock Fitment]

Thanks for coming back to me, greatly appreciated. The other idea I was toying with is forgetting the k1 rear end mod and fitting WP banana arm with curved three spoke wheel and using a curved three spoke k7 hayabusa front in my k1 front end. At least then there is symmetry front and rear. It's a difficult one...... 

[Slingshot K1 Swingarm Shock Fitment]

I've seen a couple of different options for adapting at slingshot to take a K1 swing arm.... namely issues with alignment of the shock and dogbones.... has anyone succeeded in getting it to work properly? 

[Mikuni VM29 Flatside Carbs - GSXR 750 slabside]

I'm off to read the fucking rules.

[GSX750E - GSXR Slingshot]

Thank you! 

[GSX750E - GSXR Slingshot]

Hi buddy, 2" shorter but there's a good inch and a half adjustment. 

[GSXR Slabside Clock Surround]

Thanks Nelson, I'll have a butchers! Appreciated. 

[GSX750E - GSXR Slingshot]

K1 swing arm in and forks (top bearing needs to be replaced), GSXR engine in place, fabricating mounts at the weekend- thanks to a top bloke supplying the drawings! Lots to do..... 

[GSXR Slabside Clock Surround]

Slight problem, the section won't allow access due to insufficient input. Any idea if I can get around it? 

[GSXR Slabside Clock Surround]

Thanks both! Appreciated.