scott-s Posted August 11, 2018 Posted August 11, 2018 Stick with me here.... Putting a '00 Teapoy GSX750F in a 1980 GS550 frame. Picked up some '95 GSX750F carbs because they're supposed to play better with pods/jets. Tried to test fit the carbs today to check for tank/petcock clearance. There's a HUGE mismatch between the manifolds that came with the carbs and the head. The stock '00 manifolds don't quite seat completely on the carbs. They'd probably be OK, but they're a good bit taller. That means the filters now foul the frame. I looked up the numbers on the "95" manifolds and they cross reference to '89-90 GSXR 750 and '97 GSX750....not what I was sold...... It looks like I need '89-97 GSX750F manifolds. I looked up a few sets on Eblag, but the numbers that I can read don't quite cross reference. And some show carb balance pipe nipples. I've already had the '95 carbs professionally rebuilt and bought a jet kit for them. What manifolds do I need to make them fit the '00 head? Quote
scott-s Posted August 12, 2018 Author Posted August 12, 2018 Some info/leads I was given: Look for a part number with "40C0" in it. These are for 36mm carbs on Non-Dot heads. 13110-40C0 13120-40C0 13130-40C0 13140-40C0 I was told that .90-92 GSXR-750 or 1100 would work, '89-92 GSXR-1100, and maybe the '91-95(ish) GSX1100G shafty bike. When I look up those part #'s on the fiche, it shows this: Assemblies where 13110-40C00 is used 1989 GSX-R1100 - CYLINDER HEAD 1990 GSX-R1100 - CYLINDER HEAD 1991 GSX-R1100 - CYLINDER HEAD 1991 GSX1100G - CYLINDER HEAD 1992 GSX-R1100 - CYLINDER HEAD 1992 GSX1100G - CYLINDER HEAD 1993 GSX1100G - CYLINDER HEAD 1997 Bandit (GSF1200S) - CYLINDER HEAD 1998 Bandit (GSF1200S) - CYLINDER HEAD 1999 Bandit (GSF1200S) - CYLINDER HEAD 2000 Bandit (GSF1200S) - CYLINDER HEAD Does that sound correct? Look for those numbers/models to fit the carbs I have to my '00 head? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.