Ted M Posted April 14, 2016 Posted April 14, 2016 (edited) Hello, I need to remove the oil jets from my B12. These are the ones that look like they will take a flat bladed screwdriver at the rear of cylinders 1 and 4. Can anybody advise please. Edited April 14, 2016 by Ted M Inserting photo Quote
Kid Kearsley Posted April 14, 2016 Posted April 14, 2016 Only held in with an o ring. Are your engine casings split from its upper and lower? Quote
Ted M Posted April 14, 2016 Author Posted April 14, 2016 (edited) Yes mate I figured that was the case. The ones between the cylinders pop out easily because you can get behind them. I can't figure out how to grip these buggars though. Edited April 14, 2016 by Ted M Auto correc Quote
Ted M Posted April 14, 2016 Author Posted April 14, 2016 Yes mate the engine is in atomic sized particles Quote
Kid Kearsley Posted April 14, 2016 Posted April 14, 2016 Just push down on the cut out part till it comes out towards the crank Quote
Kid Kearsley Posted April 14, 2016 Posted April 14, 2016 Or am I getting it mixed up. Hang on... Quote
Kid Kearsley Posted April 14, 2016 Posted April 14, 2016 Sorry. Metal tweezers and pull out towards to away from the crank. Dumbass moment Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.