RobNukem Posted September 10 Posted September 10 I’ve just put my usd forks back together but I have a leak in one of them coming from the cartridge bolt everything is clean and all the threads are ok. I’ve had them apart twice now and I hope I don’t have to remove the stanchion from the calliper mount. Quote
gorbys Posted September 12 Posted September 12 On 9/10/2024 at 10:25 PM, RobNukem said: I’ve just put my usd forks back together but I have a leak in one of them coming from the cartridge bolt everything is clean and all the threads are ok. I’ve had them apart twice now and I hope I don’t have to remove the stanchion from the calliper mount. The one that's underneath? Is the copper washer in good condition or there at all? Quote
RobNukem Posted November 28 Author Posted November 28 So sorry for not replying sooner but the copper washers are new but they were not tightened up enough. I bought a hex bar with a hole down the middle to do them up properly. Thanks anyway for the reply Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.