Matty B Posted February 7, 2016 Posted February 7, 2016 Hey all. Anyone know of an off the shelf adaptor plate setup to fit the 88+ brake and wheel combo to the 750 slabbies'? Quote
GsxrCol Posted February 7, 2016 Posted February 7, 2016 You won't find an off the shelf option, but it should be easy enough to get some of these made up. I used 1100 slabbie discs (310mm) and opened up the bottom mount on the forks to 10mm. There are other more elaborate and probably technically better than these out there but they worked a treat. Quote
Matty B Posted February 7, 2016 Author Posted February 7, 2016 Thanks mate. Looks like a simple solution.Running a 17" with 1100L discs but a variation of your method might do the trick. Quote
Nzmikey Posted February 8, 2016 Posted February 8, 2016 Hey cheers for that ... he was asking for me ... I had forgotten I had signed up here ... Are you able to post up the dimensions Quote
GsxrCol Posted February 8, 2016 Posted February 8, 2016 I have the drawings at home mate, will post up tonight. 1 Quote
GsxrCol Posted February 8, 2016 Posted February 8, 2016 Here ya go bud; CALIPER LEFT HAND.doc caliper right hand.doc Quote
Nzmikey Posted February 8, 2016 Posted February 8, 2016 Very flash ... Cheers for that ... I shall get on to making them. Then I need to get the exhaust manifold 1/2 rounds from partzilla and I will be a happy man .... For a month then I will find something else to do Quote
GsxrCol Posted February 8, 2016 Posted February 8, 2016 Haha, there is ALWAYS something else to do Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.